Schluter®-DECO-SG

Decorative edge-protection profile with support channel for glass panels

Schluter®-DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings. The profile may also be used as a support channel for glass walls. The 1/2" wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm).
  • Creates decorative shadow gap between tiles
  • Support channel for glass walls up to a thickness of 3/8" (10 mm) or 1/2" (12.5 mm)
  • Available in satin anodized aluminum, and bright chrome anodized aluminum and stainless steel
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-DECO-SG is an anodized aluminum, decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm)-wide channel that provides a shadow gap between tile courses or other wall covering. The profile may also be used as a support channel for glass walls, up to a thickness of 3/8" (10 mm) or 1/2" (12.5 mm). DECO-SG features a trapezoid-perforated anchoring leg that is secured in the bond coat beneath the tile.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where profile is to be placed.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile, leaving a space for grout of approximately 1/16" – 1/8" (1.5 – 3 mm).

7. Fill the joints completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Warranties

Shower System Warranty
29.91 KB
Pdf
Wall and Countertop Profiles Warranty
27.28 KB
Pdf

Product Table

10868-preview
21.14 KB
Profiles_Walls
1.64 MB
Pdf

Brochures and Pamphlets

Commercial Product Overview
5.34 MB
Pdf
Profile Brochure
2.14 MB
Pdf
Profile Finishes and Colors
2.45 MB
Pdf

Handbooks

Shower System Installation Handbook
1.76 MB
Pdf

Data sheets

Wall and Countertop Profiles Data Sheet
1.98 MB
Pdf
Shower System Data Sheet
6.25 MB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

How to install the Schluter®-DECO-SG Profile

How to install the Schluter®-DECO-SG Profile

04:08
Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Walls / Edging & Outside Wall Corners

Schluter®-INDEC

For Walls / Edging & Outside Wall Corners

Schluter®-QUADEC

For Walls / Decorative

Schluter®-QUADEC-FS

For Walls / Edging & Outside Wall Corners

Schluter®-DECO-DE

For Walls / Edging & Outside Wall Corners

Schluter®-JOLLY

For Walls / Decorative

Schluter®-DESIGNLINE