Schluter®-DIADEC-K

Schluter®-DIADEC-K is a variant of the DIADEC profile without the anchoring leg. The reveal of the profile forms a 45° beveled edge.

  • Features a 45° beveled edge
  • Suited for finishing edges in retrofit applications, such as tile installation over existing wall tiles
  • Prevents tile edges from chipping
  • Features an open cavity that is filled with thin-set mortar to secure the profile with tiles at least 1/4" (6mm) thick
  • Outside corners available
  • Available in various finishes of anodized aluminum
Read more

Schluter®-DIADEC-K is a variant of the DIADEC profile without the anchoring leg. The reveal of the profile forms a 45° beveled edge.

  • Features a 45° beveled edge
  • Suited for finishing edges in retrofit applications, such as tile installation over existing wall tiles
  • Prevents tile edges from chipping
  • Features an open cavity that is filled with thin-set mortar to secure the profile with tiles at least 1/4" (6mm) thick
  • Outside corners available
  • Available in various finishes of anodized aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-DIADEC-K

Schluter®-DIADEC-K

Variant of the DIADEC profile without the anchoring leg
Schluter®-DIADEC-K
Schluter®-DIADEC-K
Schluter®-DIADEC-K
Schluter®-DIADEC-K
Schluter®-DIADEC-K

Product type

Next

AccessoriesLearn More

Recommended products based on your specifications

/

Schluter®-DIADEC-K is a variant of the DIADEC profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. DIADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings at least 1/4" (6 mm) thick. The profile is particularly suited for finishing edges in retrofit applications, such as tile installation over existing wall tiles.

Note: The outside corner can be used with any size of the DIADEC profile.

1. DIADEC-K may be used to cover assembly edges at least 1/4" (6 mm) thick.

2. Fill the profile cavity with thin-set mortar.

3. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed.

4. Press the profile into the mortar and align. Leave a space of approximately 1/16"-1/8" (1.5 – 3 mm) between the profile and tile.

5. Fill joints completely with grout or setting material.

6. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately.

Note: Corners/end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories.

The Schluter®-DIADEC-K profile requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Do not use abrasive cleaning agents.

Downloads

Warranties

Data sheets

Brochures and Pamphlets

FAQ

Watch & Learn about this product

/

Schluter®-DIADEC

Edging & Outside Wall Corners

Schluter®-DIADEC

Finishing and edge-protection profile with 45° beveled edge for outside wall corners and edges.

Schluter®-QUADEC-K

Edging & Outside Wall Corners

Schluter®-QUADEC-K

Finishing and edge-protection profile with a squared reveal surface for retrofit applications

Schluter®-QUADEC

Edging & Outside Wall Corners

Schluter®-QUADEC

Finishing and edge-protection profile with a squared reveal surface

Schluter®-RONDEC

Edging & Outside Wall Corners

Schluter®-RONDEC

Finishing and edge-protection profile with a rounded reveal surface