Schluter®-VINPRO-T

Retrofit resilient surface floor profile for same-height transitions

Schluter®-VINPRO™-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
  • Prevents resilient surface coverings from chipping
  • Ideal for floor installations where tile is bordered by wood, laminate, or other hard floor coverings
  • Designed for floor transitions in retrofit applications
  • Available in anodized aluminum in three finish colors
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter-VINPRO™-T is designed to provide transitions between existing same-height, resilient floor coverings, in new and  retrofit applications (e.g. LVT). VINPRO-T is installed within the joint cavity and overlaps adjoining surface materials, thus preventing edges from becoming damaged when subjected to mechanical stress.

Schluter resilient surface covering profiles require no special maintenance or care and are resistant to mold and fungi. Clean profiles using neutral cleaning agents. For anodized aluminum, do not use abrasive or strong alkaline cleaning agents.

1. To ensure proper support of the lateral crosspiece, ensure the joint width is less than 1/2"" (12.5 mm).

2. The joint cavity must be at least 1/8" (3mm) deep and free of debris. Substances that inhibit adhesion must be removed from the sides of the joint.

3. Fill the joint with elastomeric sealant such as Schluter-KERDI-FIX or similar. Insert the vertical leg of VINPRO-T in the joint so that lateral crosspiece rests completely on the edges of the surface covering.

4. Remove any excess sealant with suitable cleaner.

Product Table

16500-preview
25.59 KB
VINPRO
287.38 KB
Pdf

Brochures and Pamphlets

VINPRO Brochure
739.06 KB
Pdf

Warranties

VINPRO Profiles Warranty
10.13 MB
Pdf

Data sheets

VINPRO Data Sheet
179.27 KB
Pdf
Q:

Are screws included with the VINPRO profiles?

A:

Screws are not included with the profiles. #6 / M3.5 screws are recommended ...

Read more
Q:

Is KERDI-FIX a suitable adhesive to glue down the VINPRO profiles?

A:

KERDI-FIX is our recommended adhesive for installing VINPRO profiles ...

Read more
Q:

Is a leveling patch required to feather out the anchoring leg to prevent telegraphing through to the top surface of the vinyl flooring?

A:

No, the anchoring leg for VINPRO is designed with this issue in mind...

Read more
Q:

What finishes are the VINPRO profiles available in?

A:

The VINPRO profiles are available in brushed chrome (ACGB), brushed nickel (ATGB), and brushed antique bronze (ABGB) ...

Read more
Q:

How can I choose the best profile height for my resilient covering?

A:

We recommend choosing the profile height that is up to a 0.5 mm greater than the coverings thickness ...

Read more

CAD drawings

VINPRO-T CAD
55.82 KB
DWG
VINPRO-T CAD
196.41 KB
Pdf

Specify our products using the

Specification Logo

Profiles for Resilient Surface Coverings / For Floors

Schluter®-VINPRO-S

Profiles for Resilient Surface Coverings / For Floors

Schluter®-VINPRO-U

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-EKSB

Profiles for Resilient Surface Coverings / For Stairs

Schluter®-VINPRO-RO

Profiles for Resilient Surface Coverings / For Stairs

Schluter®-VINPRO-STEP