Schluter®-KERDI-DRAIN-AC

The Schluter®-KERDI-DRAIN-AC commercial adaptor kit is designed to convert clamping ring drains by equipping them with an integrated bonding flange.

  • Adaptor kit is used when the clamping ring drain cannot be removed
  • Kit includes a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains
  • The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts
  • Connection is made watertight via the rubber gasket and KERDI-FIX adhesive/sealant
  • Suitable for both KERDI-SHOWER-ST shower tray and mortar bed applications
  • Available in ABS and stainless steel
  • Adaptor ring: Ⓓ Schluter-Systems L.P., U.S. patent No. D593,641, other patents pending

Read more

The Schluter®-KERDI-DRAIN-AC commercial adaptor kit is designed to convert clamping ring drains by equipping them with an integrated bonding flange.

  • Adaptor kit is used when the clamping ring drain cannot be removed
  • Kit includes a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains
  • The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts
  • Connection is made watertight via the rubber gasket and KERDI-FIX adhesive/sealant
  • Suitable for both KERDI-SHOWER-ST shower tray and mortar bed applications
  • Available in ABS and stainless steel
  • Adaptor ring: Ⓓ Schluter-Systems L.P., U.S. patent No. D593,641, other patents pending

Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-KERDI-DRAIN-AC

Schluter®-KERDI-DRAIN-AC

Commercial adaptor kit converts clamping ring drain to integrated bonding flange drain
Schluter®-KERDI-DRAIN-AC
Schluter®-KERDI-DRAIN-AC
Schluter®-KERDI-DRAIN-AC

Product type

Next
Schluter®-KERDI-DRAIN-AC

Schluter®-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter®-KERDI or other load-bearing, bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. KERDI-DRAIN consists of a drain casing and fully adjustable grate assembly or covering support to which tile is applied. The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering.

The standard KERDI-DRAIN is attached directly to the waste line. The drain casing is available in ABS, PVC, or stainless steel. The plastic drain casings feature a fleece-covered bonding flange. They are available with standard 2" (50 mm) and 3" (75 mm) outlets and attached to the pipe using an appropriate solvent cement. The stainless steel drain casings are available with standard 2" (50 mm) and 3" (75 mm) no-hub outlets and 2" (50 mm) threaded outlet. The no-hub outlets are attached to the pipe using an appropriate mechanical (e.g., flexible or no-hub) coupling. The threaded outlets are attached to the pipe using thread sealing compound or tape. The simple connection to standard drain outlets makes KERDI-DRAIN suitable for new construction and renovation.

The KERDI-DRAIN adaptor kit is designed to convert clamping ring drains by equipping them with an integrated bonding flange. The adaptor kit includes a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains. The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts. This connection is made watertight via the rubber gasket and Schluter®-KERDI-FIX adhesive/sealant. The integrated bonding flange slides into the adaptor ring, with the over-molded rubber gasket ensuring a watertight seal. Commercial KERDI-DRAIN adaptor kits feature a 7-1/2" (191 mm) diameter adaptor ring and are available with a stainless steel bonding flange or an ABS bonding flange. The ABS bonding flange is available in two sizes (standard or extended length) to accommodate different tile assembly thicknesses. The residential KERDI-DRAIN adaptor kit features a 5-1/4" (133 mm) diameter adaptor ring and an ABS bonding flange. The KERDI-DRAIN adaptor kit is particularly useful in renovations where the clamping ring drains are difficult to replace with the standard KERDI-DRAIN (e.g., when they are set in concrete slabs).

The grate assembly consists of a height adjustment collar, lateral adjustment ring, and drain grate or covering support. The grates are installed in conjunction with a height adjustment collar and lateral adjustment ring, which are made of ABS or stainless steel, to allow for simple and convenient adjustment when setting the tile. Drain grates are available in stainless steel with a polished or oil-rubbed bronze finish and in anodized aluminum with a brushed copper, brushed brass, or brushed nickel finish. The polished stainless steel grates are available in 4" (100 mm) -square, 6" (150 mm) -square and -round versions. All other grates are available in the 4" (100 mm) -square version only. Please note that grate assemblies included with the plastic KERDI-DRAIN featuring 3" (75 mm) outlets and the residential adaptor kits only allow vertical and tilt adjustment (no lateral adjustment). The covering support is a 4" (100 mm) -square stainless steel plate with Schluter®-KERDI laminated on the surface to allow for bonding of ceramic or stone tile, which creates a virtually invisible drainage line.

Installation instructions for the use of KERDI-DRAIN in shower applications can be found in the Schluter®-Shower System Installation Handbook.

If a clamping ring drain is installed, replace with KERDI-DRAIN or convert using the KERDI-DRAIN adaptor kit.

1. Remove the clamping ring from the installed drain and save the bolts. Align the bolt pattern of the clamping ring with the adaptor ring and punch the matching inserts through the adaptor ring.

2. Apply a 1/4" - 3/8" (6 mm - 10 mm) bead of KERDI-FIX to the installed drain flange. Place the adaptor ring on the installed drain, re-insert the bolts, and tighten evenly. Make bolts finger-tight plus 1/4 turn; over tightening may warp the ring and result in leaks.

3. Slide the adaptor flange into the adaptor ring and ensure full support underneath with mortar or the detachable center section of the foam tray. Depending on the installed drain elevation, it may be necessary to install a polystyrene foam panel, tile backer board, etc. prior to the tray. Install the tray as per the instructions in the Schluter®-Shower System Installation Handbook.

Note: Schluter®-Systems recommends a leak test be performed on the connection between the drain and the waste line prior to continuing with the remainder of the installation whenever possible.

Schluter-KERDI-DRAIN requires no special maintenance and is resistant to mold and fungi. The grates may be removed to clean the drain housing and the drain pipes. Clean the grates using common household cleaning agents. Stainless steel grates exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Do not use abrasive or alkaline cleaning agents.

Downloads

Warranties

Data sheets

Handbooks

/

Schluter®-KERDI-DRAIN-AR

Drains

Schluter®-KERDI-DRAIN-AR

Residential adaptor kit converts clamping ring drain to integrated bonding flange drain

Schluter®-KERDI-DRAIN

Drains

Schluter®-KERDI-DRAIN

Floor drain with integrated bonding flange

Schluter®-KERDI

Waterproofing (KERDI)

Schluter®-KERDI

Bonded waterproofing and vapor-retardant membrane

Schluter®-KERDI-BAND

Waterproofing (KERDI)

Schluter®-KERDI-BAND

Waterproofing strip for sealing abutting joints of Schluter® membranes and building panels