Best Drain for Your Shower
Scott McGillivray
Search Results for
R
Radius available for products with this label
Schluter FAST-SET®
Schluter FAST-SET®
Schluter FAST-SET® is a specialized rapid-setting modified thin-set mortar specifically formulated for use with Schluter® membranes and boards.
Schluter SET®
Schluter SET®
Schluter SET® is a premium unmodified thin-set mortar specifically formulated to use with Schluter® membranes and boards.
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA & DITRA-XL
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA and DITRA-XL perform all these functions while still providing adequate support/load distribution for the tile covering.
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e. no floating floors).
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
Balcony Profiles
Schluter®-BARA-ESOT
Schluter®-BARA-ESOT
Balcony Profiles
Schluter®-BARA-ESOT
Schluter®-BARA-ESOT is a skirting support profile made of stainless steel for use in applications where no load-bearing substrate is available to support the skirting tiles. These substrates include metal flashing or bituminous waterproofing layers that are used at floor/wall transitions on balconies and terraces.
For Floors / Same-height Transitions
Schluter®-DECO
R
Schluter®-DECO
View Product Details
Schluter®-DECO
For Floors / Same-height Transitions
Schluter®-DECO
Schluter®-DECO provides decorative lines within tile coverings and edge protection at transitions from tile coverings to other same-height surface coverings, such as wood or carpet.
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-S
Schluter®-VINPRO-S
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-S
Schluter®-VINPRO-S is designed to provide a finished edge for resilient coverings (e.g., LVT) in applications that typically border floor coverings of similar heights, or as a finishing edge to wall skirting applications. The profile features a minimal and discreet reveal to enhance the coverings while offering transition and edge protection.
Removable Fleece
Schluter®-REFLEECE
Schluter®-REFLEECE
Removable Fleece
Schluter®-REFLEECE
Schluter®-REFLEECE is removable fleece used to create temporary floor coverings. Made of recycled PET with a self-adhesive coating on the back, REFLEECE measures 1/32” (0.8 mm) thick and is suitable for the application of temporary, removable tile and natural stone coverings. REFLEECE is easy to install and can be removed during deconstruction without causing damage to the existing subfloor.
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK-F/-KERS-B
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK and KERDI-KERS-B are preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
New Waterproof Shower Components
Tile showers must be thoroughly waterproofed to provide reliable performance. But properly waterproofing a shower area takes time and for professional tile installers, time is money.
Sound Control with DITRA-HEAT DUO at The Vesper in Austin, Texas
The Vesper project in Austin, Texas, utilized Schluter® Systems' DITRA-HEAT-DUO membrane for waterproofing and sound control in 283 condominium units. Collaboration with Schluter and STG-Austin expedited the project, ensuring quality results. Tests demonstrated exceptional resilience of Schluter products, surpassing building code standards with an AIIC value of 64. This project underscores the importance of efficiency and quality in multi-family construction.
The Rise of LVT Flooring
In recent years, Luxury Vinyl Tile (LVT) has gained traction in the flooring industry as a popular option for both residential and commercial spaces. Known for its durability, aesthetic appeal, and water-resistant properties, LVT has quickly become a go-to option for homeowners, designers, and builders alike.
Q:
What are the restrictions on where I can install the Schluter®-DITRA-HEAT heating cables?
A:
The DITRA-HEAT heating cables cannot be installed under vanities with no air space beneath, bathtub platforms...
Read more
Q:
Can the Schluter-DITRA-HEAT-E-RS1 thermostat be installed to replace an existing Schluter Thermostat? Can it be installed to replace a non-Schluter Thermostat? How is it installed?
A:
YES, the thermostat can be used with any electric radiant floor heating system. Consult with a local electrician to ensure...
Read more
Q:
What is the minimum stud spacing when installing the Schluter®-DITRA-HEAT-E-HK heating cables?
A:
A cable spacing of 3 studs between runs is standard. However, cable may also be spaced at continuously alternating 3 stud – 2 stud intervals in isolated...
Read more
