Vinpro Profiles for Resilient Flooring
Schluter is launching a line of profiles made specifically for resilient flooring applications.
Search Results for
For Stairs / Cover the Sub-Assembly
TREP-FL
TREP-FL
For Stairs / Cover the Sub-Assembly
TREP-FL
The Schluter®-TREP-FL is a decorative stair-nosing profile with a protruding rounded edge that can be integrated into stairs covered with tile or stone.
Profiles
KERDI-BOARD-ZB
KERDI-BOARD-ZB
Profiles
KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
Profiles for LVT / LVT Applications on Stairs
VINPRO-STEP
VINPRO-STEP
Profiles for LVT / LVT Applications on Stairs
VINPRO-STEP
Schluter®-VINPRO-STEP is a finishing and edging profile for resilient floor covering (e.g., LVT) installations on stairs. The top of the profile features a square design and a capping flange that is ribbed to provide slip protection.
For Walls / Edging & Outside Wall Corners
JOLLY-P
JOLLY-P
For Walls / Edging & Outside Wall Corners
JOLLY-P
Schluter®-JOLLY-P is a PVC profile featuring an 87° angle designed to finish and protect external corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. JOLLY-P in sizes 1/4" (6 mm) and higher features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile.
Profiles
KERDI-BOARD-ZW
KERDI-BOARD-ZW
Profiles
KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
For Walls / Edging & Outside Wall Corners
QUADEC
QUADEC
For Walls / Edging & Outside Wall Corners
QUADEC
Schluter®-QUADEC is a finishing and edge protection profile for tiled edges and outside corners of tiled surfaces, and is distinguished by its squared reveal surface.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-EDP
DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Profiles
KERDI-BOARD-ZA
KERDI-BOARD-ZA
Profiles
KERDI-BOARD-ZA
The Schluter®-KERDI-BOARD-ZA is a U-shaped brushed stainless steel profile with two perforated sides designed to finish edges of partition walls, shelves, and similar structures made with KERDI-BOARD.
For Floors / Sloped Transitions
RENO-V
RENO-V
For Floors / Sloped Transitions
RENO-V
Schluter®-RENO-V is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-BTS
DILEX-BTS
Movement Joint Profiles / Surface & Expansion Joints
DILEX-BTS
Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
For Stairs / Slip-resistant Treads
TREP-E/-EK
TREP-E/-EK
For Stairs / Slip-resistant Treads
TREP-E/-EK
Schluter®-TREP-E and TREP-EK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
Balcony Profiles
BARA-RAK
BARA-RAK
Balcony Profiles
BARA-RAK
Schluter®-BARA-RAK is a color-coated aluminum balcony edging profile with a drip lip. It is designed to be fitted to the edges of finished sloped surfaces to form both an edging and a drip lip.
10' Profiles
Elevated ceiling heights and high tiled walls and showers are quickly becoming the norm in new construction. Reach these new heights and match the latest tile trends with our 10-foot profiles.
Cove Profile Available in more Colors
Schluter-Systems’ anodized aluminum cove-shaped profiles, the DILEX-AHK and DILEX-AHKA, are now available in seven additional colors – Schluter’s TRENDLINE color series.
Profile Colors Match Today's Tile Trends
Schluter-Systems’ new series of TRENDLINE profiles features a whole new line of colors to go with the latest trends in tile. Today’s tile plays off the look of wood and concrete and comes in a myriad of greige and metallic colors. The TRENDLINE series of profiles provides the perfect match.
Q:
Do I need to hold my profile or tile trim in the PROCUT-SQR while cutting it?
Q:
The LED is sticky from dirt or thin-set/grout dust and is difficult to insert to the profile.
A:
Clean the LED with soapy water. This same solution can be done using a spray bottle to help lubricate the interface between...
Read more
Q:
Are the components of the LIPROTEC system replaceable?
A:
Yes. The LED can easily be replaced by removing it from the mounting profile. NEC/CEC requires the drivers to be accessible, so they can also be...
Read more
