Education for Architects and Designers
Find out more about AIA and IDCEC continuing education seminars available.
Search Results for
Thermostats
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS
Thermostats
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS is a power module that extends power output when used in conjunction exclusively with the DITRA-HEAT-E-RS1 smart thermostat.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
Schluter®-SHOWERPROFILE-R
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
The Schluter®-SHOWERPROFILE-R is a two-part wall transition profile for covering the exposed wall area where the floor slopes down to a perimeter linear drain.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
A New Type of Baseboard for Tiled Floors
Baseboards are one of the finishing touches that help to complete any space. Choosing a baseboard that is attractive, durable and easy to install is particularly important in commercial settings.
Understanding Peel and Stick Uncoupling Membranes for Heated Floors
Peel and stick (PS) uncoupling membranes have hit the market and are gaining popularity. This is the new mess-free way to install an uncoupling membrane under tile, since there is no thin-set mortar required to install these membranes to plywood, OSB, gypsum, or concrete substrates – no mess, no stress.
Q:
Does DITRA-HEAT-DUO-PS provide the same waterproofing properties as DITRA-HEAT-DUO?
A:
DITRA-HEAT-DUO-PS and DITRA-HEAT-DUO feature the same plastic material and configuration.
Read more
Q:
How do I protect my laminate / LVT / SPC flooring or similar for a maximum floor temperature of 82°F (28°C)?
A:
In the "Advanced" settings, when in "Floor" control mode or in "Ambient" control mode, set "Max. Floor Temperature" to...
Read more
Q:
Can the Schluter®-DITRA-HEAT system be installed in an outdoor installation?
A:
No, the DITRA-HEAT heating cables and membrane cannot be installed outdoors. The heating cables are not rated for exterior applications.
Read more
