Vinpro Profiles for Resilient Flooring
Schluter is launching a line of profiles made specifically for resilient flooring applications.
Search Results for
R
Radius available for products with this label
Cove-shaped Profiles
DILEX-EHK
DILEX-EHK
Cove-shaped Profiles
DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
DILEX-HKS
DILEX-HKS
Cove-shaped Profiles
DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Profiles for LVT / LVT Applications on Walls
VINPRO-S
VINPRO-S
Profiles for LVT / LVT Applications on Walls
VINPRO-S
Schluter®-VINPRO-S is designed to provide a finished edge for resilient coverings (e.g., LVT) in applications that typically border floor coverings of similar heights, or as a finishing edge to wall skirting applications. The profile features a minimal and discreet reveal to enhance the coverings while offering transition and edge protection.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-STF
DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
Profiles for LVT / LVT Applications on Floors
VINPRO-U
VINPRO-U
Profiles for LVT / LVT Applications on Floors
VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Balcony Profiles
BARA-RWL
R
BARA-RWL
View Product Details
BARA-RWL
Balcony Profiles
BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
For Floors / Sloped Transitions
RENO-TK
R
RENO-TK
View Product Details
RENO-TK
For Floors / Sloped Transitions
RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-F
DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
For Stairs / Cover the Sub-Assembly
SCHIENE-STEP
R
SCHIENE-STEP
View Product Details
SCHIENE-STEP
For Stairs / Cover the Sub-Assembly
SCHIENE-STEP
Schluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile-over-tile applications on walls. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall edge.
For Walls / Decorative
DECO-SG
DECO-SG
For Walls / Decorative
DECO-SG
Schluter®-DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings. The profile may also be used as a support channel for glass walls. The 1/2" wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm).
For Walls / Edging & Outside Wall Corners
RONDEC
RONDEC
For Walls / Edging & Outside Wall Corners
RONDEC
Schluter®-RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.
For Stairs / Slip-resistant Treads
TREP-EFK
TREP-EFK
For Stairs / Slip-resistant Treads
TREP-EFK
Schluter®-TREP-EFK is designed to provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair tread design.
10' Profiles
Elevated ceiling heights and high tiled walls and showers are quickly becoming the norm in new construction. Reach these new heights and match the latest tile trends with our 10-foot profiles.
Cove Profile Available in more Colors
Schluter-Systems’ anodized aluminum cove-shaped profiles, the DILEX-AHK and DILEX-AHKA, are now available in seven additional colors – Schluter’s TRENDLINE color series.
Profile Colors Match Today's Tile Trends
Schluter-Systems’ new series of TRENDLINE profiles features a whole new line of colors to go with the latest trends in tile. Today’s tile plays off the look of wood and concrete and comes in a myriad of greige and metallic colors. The TRENDLINE series of profiles provides the perfect match.
Q:
Do I need to hold my profile or tile trim in the PROCUT-SQR while cutting it?
Q:
The LED is sticky from dirt or thin-set/grout dust and is difficult to insert to the profile.
A:
Clean the LED with soapy water. This same solution can be done using a spray bottle to help lubricate the interface between...
Read more
Q:
Are the components of the LIPROTEC system replaceable?
A:
Yes. The LED can easily be replaced by removing it from the mounting profile. NEC/CEC requires the drivers to be accessible, so they can also be...
Read more
