Cove Profile Available in more Colors
Schluter-Systems’ anodized aluminum cove-shaped profiles, the DILEX-AHK and DILEX-AHKA, are now available in seven additional colors – Schluter’s TRENDLINE color series.
Search Results for
R
Radius available for products with this label
For Floors / Sloped Transitions
RENO-V
RENO-V
For Floors / Sloped Transitions
RENO-V
Schluter®-RENO-V is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations.
For Walls / Edging & Outside Wall Corners
QUADEC
QUADEC
For Walls / Edging & Outside Wall Corners
QUADEC
Schluter®-QUADEC is a finishing and edge protection profile for tiled edges and outside corners of tiled surfaces, and is distinguished by its squared reveal surface.
Cove-shaped Profiles
DILEX-EHK
DILEX-EHK
Cove-shaped Profiles
DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Profiles for LVT / LVT Applications on Walls
VINPRO-S
VINPRO-S
Profiles for LVT / LVT Applications on Walls
VINPRO-S
Schluter®-VINPRO-S is designed to provide a finished edge for resilient coverings (e.g., LVT) in applications that typically border floor coverings of similar heights, or as a finishing edge to wall skirting applications. The profile features a minimal and discreet reveal to enhance the coverings while offering transition and edge protection.
For Stairs / Slip-resistant Treads
TREP-E/-EK
TREP-E/-EK
For Stairs / Slip-resistant Treads
TREP-E/-EK
Schluter®-TREP-E and TREP-EK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
Cove-shaped Profiles
DILEX-HKS
DILEX-HKS
Cove-shaped Profiles
DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-STF
DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
Profiles for LVT / LVT Applications on Floors
VINPRO-U
VINPRO-U
Profiles for LVT / LVT Applications on Floors
VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
For Floors / Sloped Transitions
RENO-TK
R
RENO-TK
View Product Details
RENO-TK
For Floors / Sloped Transitions
RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-F
DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
For Walls / Decorative
DECO-SG
DECO-SG
For Walls / Decorative
DECO-SG
Schluter®-DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings. The profile may also be used as a support channel for glass walls. The 1/2" wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm).
For Stairs / Slip-resistant Treads
TREP-EFK
TREP-EFK
For Stairs / Slip-resistant Treads
TREP-EFK
Schluter®-TREP-EFK is designed to provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair tread design.
Seaside Curbed
Beach vibes abound with a neutral palette and cool accessories. Complete a Schluter Shower System with a shower tray, finishing profiles, and KERDI-LINE tileable grate.
Black Décor
Matching black shelf, profiles, and drain grate complete the look of this black and white bathroom. DITRA-HEAT warms the tile floor for that complete spa experience.
Trendline Totally on Trend Finishes
Match the latest tile trends with Schluter’s TRENDLINE linear drain grates in nine colors. Pair with KERDI-LINE, KERDI-DRAIN, and matching profiles for a seamless look. Explore now!
Q:
The tile I’ve chosen for my floor doesn’t have a matching cove base available. I’d rather not select another tile. Do you have any solutions?
A:
Yes. Schluter-Systems offers various profiles that allow the user to produce a finished tile base with a cove...
Read more
Q:
Do I need to provide movement joints when I use Schluter-DITRA in my tile installation?
A:
Yes. DITRA does not eliminate the need for movement joints. Movement joints are essential in any tile installation to prevent...
Read more
Q:
How do I know which profile size to use?
A:
Profile size selection is based on the thickness of the tile and amount of setting material used to set the tile...
Read more
