DILEX-F Slimmest Movement Joint Profile
Discover Schluter®-DILEX-F, the ultra-slim movement joint profile engineered for seamless tile installations. Prevent damage, accommodate movement, and elevate aesthetics with ease.
Search Results for
R
Radius available for products with this label
Cove-shaped Profiles
DILEX-EHK
DILEX-EHK
Cove-shaped Profiles
DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
DILEX-HKS
DILEX-HKS
Cove-shaped Profiles
DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Profiles for LVT / LVT Applications on Walls
VINPRO-S
VINPRO-S
Profiles for LVT / LVT Applications on Walls
VINPRO-S
Schluter®-VINPRO-S is designed to provide a finished edge for resilient coverings (e.g., LVT) in applications that typically border floor coverings of similar heights, or as a finishing edge to wall skirting applications. The profile features a minimal and discreet reveal to enhance the coverings while offering transition and edge protection.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-STF
DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
Profiles for LVT / LVT Applications on Floors
VINPRO-U
VINPRO-U
Profiles for LVT / LVT Applications on Floors
VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Balcony Profiles
BARA-RWL
R
BARA-RWL
View Product Details
BARA-RWL
Balcony Profiles
BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
For Floors / Sloped Transitions
RENO-TK
R
RENO-TK
View Product Details
RENO-TK
For Floors / Sloped Transitions
RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-F
DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
For Stairs / Cover the Sub-Assembly
SCHIENE-STEP
R
SCHIENE-STEP
View Product Details
SCHIENE-STEP
For Stairs / Cover the Sub-Assembly
SCHIENE-STEP
Schluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile-over-tile applications on walls. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall edge.
For Walls / Decorative
DECO-SG
DECO-SG
For Walls / Decorative
DECO-SG
Schluter®-DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings. The profile may also be used as a support channel for glass walls. The 1/2" wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm).
For Walls / Edging & Outside Wall Corners
RONDEC
RONDEC
For Walls / Edging & Outside Wall Corners
RONDEC
Schluter®-RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.
For Stairs / Slip-resistant Treads
TREP-EFK
TREP-EFK
For Stairs / Slip-resistant Treads
TREP-EFK
Schluter®-TREP-EFK is designed to provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair tread design.
Q:
Are screws included with the VINPRO profiles?
Q:
What finishes are the VINPRO profiles available in?
A:
The VINPRO profiles are available in brushed chrome (ACGB), brushed nickel (ATGB), and brushed antique bronze (ABGB) ...
Read more
Q:
How can I choose the best profile height for my resilient covering?
A:
We recommend choosing the profile height that is up to a 0.5 mm greater than the coverings thickness ...
Read more
