Schluter®-TREP-V
Perfil de aluminio anodizado para escaleras con banda de rodadura antideslizante de PVC texturado
- La banda de rodadura de PVC con textura especial y diseño antideslizante en todas las direcciones proporciona seguridad en escaleras revestidas de baldosas y evita que se acumule la suciedad
- El inserto de la banda de rodadura es reemplazable y se ofrece en una variedad de colores que permiten obtener opciones contrastantes y de alta visibilidad
- Disponible con banda de rodadura estrecha (TREP-V 42) o ancha (TREP-V 60)
- Evita que los bordes de las baldosas de las escaleras se astillen
- También hay tapones terminales disponibles para TREP‑V.
Trouvez ici les accessoires recommandés
Estimador de perfiles
Descubra lo que necesita para proteger las baldosas y facilitar las transiciones.
Schluter®-TREP-V is an anodized aluminum profile with a PVC tread designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface. The PVC tread is available in a variety of colors to provide contrast and can be replaced in case of damage or wear. TREP-V is available with either a narrow (TREP-V 42) or wide (TREP-V 60) tread. Matching end caps are also available.
The Schluter®-TREP-V require no special maintenance or care and are resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents.
The treads of TREP-V can be replaced in case of damage or wear.
1. Select profile size according to tile thickness and format.
2. Install riser tile flush with the stair tread surface.
3. Using a notched trowel, apply thin-set mortar along the edge area above the riser.
4. Fill cavities on the underside of the profile with thin-set mortar.
5. Press the trapezoid-perforated anchoring leg of the profile into the thin-set mortar, making sure the front edge of the support section is aligned flush with the riser tile. Full coverage must be obtained at the edge area to ensure support of the profile.
6. Trowel additional thin-set mortar over the anchoring leg and the stair tread surface to ensure full coverage and support of the tile edges.
7. Solidly embed the tread tiles so that the tiled surface is flush with the top of the profile.
8. A joint of approx. 1/16" - 1/8" (1.5 -3 mm) should be left between the tile and the profile.
9. Fill joint completely with grout or setting material.
Regarder et apprendre
À propos du produit
Introducing the stair nosing profile, Schluter®-TREP-V
Trouvez des didacticiels existants et des vidéos de documentation de projet pour apprendre comment tirer le meilleur parti de nos produits - pour plus de plaisir dans votre vie, commencez maintenant!
Regardez plus de vidéos / listes de lecture
