Schluter^®-SCHIENE-STEP

Schluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile over tile applications on walls. The profile features a trapezoid-perforated anchoring leg, which is secured in the mortar bond coat beneath the tile. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the subassembly, top of the riser, or existing wall tile edge.

SCHIENE-STEP is available in anodized aluminum and brushed stainless steel versions, which have different shapes and intended uses. The stainless steel version is available in three vertical leg lengths: 1-1/2" (39 mm) for countertops, 1-3/16" (30 mm) for stairs, and 7/16" (11 mm) for tile over tile applications. Matching inside and outside corners and connectors are available, depending on the vertical leg length. The anodized aluminum version is intended for residential stair applications (stairs not exposed to heavy traffic). It is available in two vertical leg lengths, 1-3/16" (30 mm) and 1-1/2" (39 mm),to cover the edge of the sub-assembly. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. Accessories are not available for the anodized aluminum version.

The Schluter®-SCHIENE profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents .Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. In the case of anodized aluminum, do not use abrasive or strong alkaline cleaning agents.

1. Select profile according to tile thickness and sub-assembly thickness.

2. Using a notched trowel, apply thinset mortar over the area where the trapezoid-perforated anchoring leg will be placed.

3. Press the perforated anchoring leg of the profile into the thin-set mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approximately 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" – 1/8" (1.5 – 3 mm). For SCHIENE-STEP in stainless steel, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm).

7. Llene la junta completamente con lechada o material de fraguado.

8.Trabaje con materiales y herramientas que no rayen ni dañen superficies sensibles. Los materiales de fraguado deben retirarse inmediatamente, especialmente el aluminio.

Nota: para la instalación de las esquinas y conectores SCHIENE-STEP utilizar KERDI-FIX, silicona o un adhesivo similar. Antes de la aplicación, quitar cualquier sustancia que pueda inhibir el contacto (por ej., grasas). Los accesorios deben superponerse al perfil al menos 3/8" (10 mm). Los accesorios deben deslizarse sobre los perfiles durante la instalación (no pueden colocarse encima después de la instalación).