Schluter®-TREP-EFK

Stainless steel stair profile with slip-resistant wear surface

Schluter®-TREP-EFK is designed to provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair tread design.
  •  Ensures a slip-resistant wear surface
  •  Highly visible tread, and suitable for interior and exterior use
  •  Ideal for offices, shopping malls, and other public areas
  •  Easily adhered to stair treads with suitable adhesive
  •  May be installed within recessed area on stair tread or applied to tread surface
  •  Available in stainless steel
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-TREP-EFK is designed to provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair tread design. The profile is made of attractive and durable stainless steel, making it particularly suited for areas subjected to heavy foot traffic, such as offices or public buildings.

The profile is typically adhered within a recessed area on stair treads covered with natural stone or constructed of concrete.  It may also be applied to the surface of existing stair treads covered with ceramic tile or natural stone or constructed of concrete.

The Schluter®-TREP-EFK stair profile requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents.Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

1. TREP-EFK may be adhered to a recessed area in the stair tread or on the surface of the tread.

2. Clean the stair tread and repair damaged areas if applicable.

3. Clean or degrease the underside of the profile.

4. Adhere the profile by fully embedding it into a suitable adhesive (e.g., epoxy resin or KERDI-FIX, depending on the substrate).

Note: The upper profile edge of TREP-EFK is approximately 3/32" (2 mm) higher than the stair covering if not installed within a recessed area.

Warranties

StairNosing-Profiles-Warranty
57.5 KB
Pdf
Lifetime Thin-Set System Extended Limited Warranty
57.81 KB
Pdf

Product Table

11213-preview
19.91 KB
Profiles_Stairs
631.71 KB
Pdf

Data sheets

Stair Nosing Profiles Data Sheet
679.22 KB
Pdf

Brochures and Pamphlets

Commercial Product Overview
3.38 MB
Pdf
Q:

How do I cut profiles?

A:

Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...

Read more
Q:

Are there accessories available for my selected profile (e.g., end caps, corners, or connectors)?

A:

This depends on the particular profile chosen. Accessories are listed in the Schluter® Illustrated Price List with the products...

Read more

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo

For Stairs / Slip-resistant Treads

Schluter®-TREP-E/-EK

For Stairs / Slip-resistant Treads

Schluter®-TREP-G/-GK

For Stairs / Slip-resistant Treads

Schluter®-TREP-SE-S-B

For Stairs / Cover the Sub-Assembly

Schluter®-TREP-FL

For Stairs / Cover the Sub-Assembly

Schluter®-SCHIENE-STEP