Schluter®-DESIGNBASE-SL

Schluter®-DESIGNBASE-SL is a finishing profile used as an alternative to baseboards.

  • May be installed with tile coverings or other floor coverings
  • Quick and easy installation with suitable adhesive
  • 90° inside and outside corners, connectors, end caps, and sealing lip available
  • No maintenance
  • Available in anodized aluminum and color-coated aluminum
Read more

Schluter®-DESIGNBASE-SL is a finishing profile used as an alternative to baseboards.

  • May be installed with tile coverings or other floor coverings
  • Quick and easy installation with suitable adhesive
  • 90° inside and outside corners, connectors, end caps, and sealing lip available
  • No maintenance
  • Available in anodized aluminum and color-coated aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-DESIGNBASE-SL

Schluter®-DESIGNBASE-SL

Wall base profile
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL

Product type

Next

Schluter®-DESIGNBASE-SL is a finishing profile used as an alternative to baseboards. It features a clean, finished look and is simply attached to the wall area with a suitable adhesive. The profile can be equipped with an optional sealing lip to protect the floor-to-wall transition from moisture and to reduce the transmission of impact sound.

1. DESIGNBASE-SL is applied to prepared walls using KERDI-FIX, silicone, or a similar adhesive. Prior to applying the adhesive, make sure that all surfaces are free from adhesion-inhibiting substances such as oil or grease. Apply beads of adhesive to the back of the profile; then press the profile onto the wall, ensuring solid contact throughout.

2. Use a suitable cleaning agent to remove any excess adhesive from around the profile.

3. Remove the protective foil.

Install corners, connectors, and end caps using a permanently elastic, waterproof adhesive (e.g., KERDI-FIX or silicone). Prior to application, any contact-inhibiting substances (e.g., grease, etc.) must be removed. The optional sealing lip is inserted into the profile prior to installation.

DESIGNBASE-SL requires no special maintenance or care and is resistant to mold and fungi. Clean profile using appropriate household cleaning agents. In the case of anodized aluminum, do not use abrasive cleaning agents.

Downloads

FAQ

Architectural Material

Specify our products using the Arcat Logo

Watch & Learn about this product