Be Bold
Perfecting that white/black balance for total bathroom envy. Here the tile is kept continual from main floor and on into the shower, where KERDI-DRAIN-STYLE in a matte black finish blends right in.
Radius available for products with this label
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTOMovement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTOCove-shaped Profiles
Schluter®-DILEX-PHKCove-shaped Profiles
Schluter®-DILEX-PHKBalcony Profiles
Schluter®-BARA-RWLBalcony Profiles
Schluter®-BARA-RWLMovement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BTMovement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BTProfiles
Schluter®-KERDI-BOARD-ZBProfiles
Schluter®-KERDI-BOARD-ZBPaver Support System
Schluter TROBA-LEVEL-PLV60/-PLA70Paver Support System
Schluter TROBA-LEVEL-PLV60/-PLA70Paver Support System
Schluter TROBA-LEVEL-LV3/-PL10Paver Support System
Schluter TROBA-LEVEL-LV3/-PL10Waterproofing (KERDI)
Schluter®-KERDIWaterproofing (KERDI)
Schluter®-KERDIProfiles
Schluter®-KERDI-BOARD-ZAProfiles
Schluter®-KERDI-BOARD-ZAProfiles
Schluter®-KERDI-BOARD-ZCProfiles
Schluter®-KERDI-BOARD-ZCAccessories
Schluter®-KERDI-BOARD-ZS/-ZTAccessories
Schluter®-KERDI-BOARD-ZS/-ZTDrains / Floor Drains
Schluter®-KERDI-DRAIN-FDrains / Floor Drains
Schluter®-KERDI-DRAIN-FPerfecting that white/black balance for total bathroom envy. Here the tile is kept continual from main floor and on into the shower, where KERDI-DRAIN-STYLE in a matte black finish blends right in.
Just the right fit! Maximize available space with a curbless entry using the KERDI-LINE drain with perforated finish.
Why isn't my LIPROTEC LED lighting up or is flickering?
Incorrect or poor wiring connection. The polarity of low voltage V+ (RED) and V-(Black) are reversed OR the circuit breaker is off or tripped. Recheck all connections.
Read moreWhat if my LIPROTEC LED turns on but doesn't dim?
The slider is misaligned. Remove the faceplate on the ECX. Slide the black dimming lever on the ECX housing to the bottom and the face plate slider to...
Read moreI have verified a 120V input to my power supply and 24V output but my LIPROTEC LED still does not illuminate. What should I do?
Ensure that the low voltage (+ and -) connections are correct and not reversed. The connections should be...
Read more