Adapting the Drain
Schluter®-KERDI waterproofing membrane, along with drain adaptor kits were installed in over 1,200 showers at the The Choctaw Casino and Resort.
Search Results for
R
Radius available for products with this label
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SB
Schluter®-KERDI-BOARD-SB
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SB
Schluter®-KERDI-BOARD-SB is a lightweight, waterproof, prefabricated shower bench made of KERDI-BOARD that is designed to integrate with the Schluter®-Shower System.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
Schluter®-TREP-FL
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
The Schluter®-TREP-FL is a decorative stair-nosing profile with a protruding rounded edge that can be integrated into stairs covered with tile or stone.
Waterproofing
Schluter®-KERDI-SEAL-PS/-MV
Schluter®-KERDI-SEAL-PS/-MV
Waterproofing
Schluter®-KERDI-SEAL-PS/-MV
Schluter®-KERDI-SEAL-PS and Schluter®-KERDI-SEAL-MV are prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.
For Stairs / Slip-resistant Treads
Schluter®-TREP-SE-S-B
Schluter®-TREP-SE-S-B
For Stairs / Slip-resistant Treads
Schluter®-TREP-SE-S-B
Schluter®-TREP-SE, TREP-S and TREP-B are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
For Stairs / Slip-resistant Treads
Schluter®-TREP-V
Schluter®-TREP-V
For Stairs / Slip-resistant Treads
Schluter®-TREP-V
Schluter®-TREP-V is an anodized aluminum profile with a PVC tread designed to protect tiled stair edges. The specially textured slip-resistant tread makes TREP-V well suited for use in areas with heavy foot traffic, such as offices or public buildings. The replaceable PVC tread is available in a variety of colors including high visibility options.
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP/-MPV
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP is a screed joint profile with rigid PVC side sections that protect tile edges and a soft chlorinated polyethylene (CPE) movement zone that separates individual fields in the tile assembly and forms the visible surface.
Balcony Profiles
Schluter®-BARA-RW
R
Schluter®-BARA-RW
View Product Details
Schluter®-BARA-RW
Balcony Profiles
Schluter®-BARA-RW
Schluter®-BARA-RW is an L-shaped edging profile for finishing the exposed perimeters of balconies and terraces. The profile provides a neat edge appearance while concealing and protecting the exposed edges of the setting bed against weathering and corrosion.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK-F/-KERS-B
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK and KERDI-KERS-B are preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
Cables
Schluter®-DITRA-HEAT-E-HK
Schluter®-DITRA-HEAT-E-HK
Cables
Schluter®-DITRA-HEAT-E-HK
Schluter®-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications.
Schluter Showers: A Sure Bet at the Choctaw Casino & Resort
Schluter® Systems provided a winning solution for showers at the Choctaw Casino & Resort expansion project, seamlessly integrating with existing drains and saving time and costs while ensuring top-quality installations.
KERDI-DRAIN-A Installation Instructions
Click here to get detailed installation information for the Schluter-KERDI-DRAIN-A.
New Horizontal Niches Featuring LIPROTEC LED Lighting
Schluter®-Systems, a leader in innovative tile installation solutions, is excited to announce the addition of new horizontal niches to its KERDI-BOARD-SNLT product line. These niches feature integrated LIPROTEC LED lighting technology, and now offer expanded design possibilities and a sleek, modern aesthetic for shower spaces.
Q:
What is the largest size hole I can cut in the subfloor for the drain?
A:
The maximum would have a 5” diameter. A template is included in the drain kit box to guide the application.
Read more
Q:
I purchased a standard Schluter®-KERDI-DRAIN bonding flange with a 2 inch outlet; I now need the adaptor ring for an existing clamping ring drain. Will I be able to use this KERDI-DRAIN flange with the adaptor ring?
A:
No, the KERDI-DRAIN bonding flange is not compatible with the KERDI-DRAIN adaptor ring. You will need to use a KERDI-DRAIN...
Read more
Q:
What is provided in each KERDI-LINE-VARIO kit?
