Schluter®-QUADEC

Perfil de terminación y protección de bordes con superficie de reborde cuadrada

Schluter® QUADEC es un perfil de terminación y protección de cantos para bordes de baldosas y esquinas exteriores de superficies revestidas con baldosas y se distingue por su reborde cuadrado.
  • ¡Nuevo! ahora disponible en 10' (3,05 m) de longitud
  • Previene el astillado de las baldosas.
  • Puede ser incorporado como un detalle entre los campos de baldosas en pisos y paredes
  • Permite crear diseños modernos y decorativos, contrastes interesantes y coordinar con las baldosas y la lechada.
  • Combine con QUADEC-FS y/o DESIGNLINE para mayores opciones de diseño.
  • QUADEC en acero inoxidable puede utilizarse como canto de peldaño de escaleras o perfil de transición en pisos.
  • Ahora también disponible en 9/32" (7 mm) de altura en acero inoxidable y en acero inoxidable cepillado.
  • Disponible en acero inoxidable, aluminio anodizado, PVC y aluminio texturizado con revestimiento de color.
  • También disponible en acabados cuadriculado y textura de cuero
 ...read more  ...show less
myDesign logo
RAL Classic Colors
Custom Digital Printing

Tipo de producto

Select all options to find the
specific product you want to buy.
myDesign promo

Designed for Life in COLOR

Customize select profiles and shelves with RAL color matching or high-resolution digital printing. MyDesign lets you bring your design vision to life, down to the last detail.

Learn more

Find recommended accessories here

Schluter®-QUADEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a square outer corner along the surface edge.

The profile is available in stainless steel, stainless steel with structured finish, anodized aluminum and textured color-coated aluminum. QUADEC allows for modern decorative design and interesting contrasts. The profile can be combined with the QUADEC-FS feature strip profile and the DESIGNLINE border profile for further design options. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses.

QUADEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing or floor transition profile. In addition, QUADEC is suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or poured epoxy coverings. The integrated joint spacer forms a defined joint cavity with the tile.

Note: QUADEC in stainless steel does not feature the integrated joint spacer. Matching inside/outside corners and connectors are available.

The Schluter®-QUADEC profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner.Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.Oxidation films on aluminum may be removed with a common polishing agent but will form again. In the case of anodized aluminum and color-coated aluminum, do not use abrasive cleaning agents.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the QUADEC profile is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm). With the stainless steel profiles, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm).

7. Llene la junta completamente con lechada o material de fraguado.

8- Trabaje con materiales y herramientas que no rayen ni dañen superficies delicadas. Los materiales de fraguado deben quitarse inmediatamente, especialmente del aluminio.

Nota: hay disponibles esquinas y conectores a juego. Las esquinas se fijan en su lugar con mortero de capa fina. Rellene los extremos del perfil con mortero de capa fina antes de insertar los accesorios. Los conectores se fijan mediante fricción. Inserte el conector en el perfil aproximadamente a la mitad de la longitud de la pieza del conector y conecte el perfil adyacente.

Brochures and Pamphlets

perfiles-schluter
4.43 MB
Pdf
MyDesign Brochure
1.23 MB
Pdf

Warranties

garantia-limitada-de-5-anos-de-los-perfiles-para-paredes-y-encimeras-schluter-systems
175.61 KB
Pdf

Product Table

quadec
809.74 KB
Pdf
Q:

¿Cómo corto los perfiles?

A:

Los perfiles Schluter® están disponibles en diferentes materiales, por lo que los métodos de corte varían. A continuación, se indican las mejores prácticas de corte según...

Read more

CAD drawings

QUADEC E – Product Drawing – Dessin de Produit 03
2.46 MB
DWG
QUADEC A – Product Drawing – Dessin de Produit 01
104.22 KB
DWG
QUADEC PVC – Product Drawing – Dessin de Produit
183.75 KB
DWG
schlueter_cad_quadec_imp
63.63 KB
Pdf
schlueter_cad_quadec_e_inst
114.34 KB
Pdf
QUADEC E – Product Drawing – Dessin de Produit 01
171.6 KB
DWG
schlueter_cad_quadec_inst
24.63 KB
Pdf
QUADEC A – Product Drawing – Dessin de Produit
5.64 MB
Pdf
QUADEC PVC – Product Drawing – Dessin de Produit
905.03 KB
Pdf
schlueter_cad_quadec_metr
52.02 KB
Pdf
QUADEC E – Product Drawing – Dessin de Produit
6.39 MB
Pdf
QUADEC A – Product Drawing – Dessin de Produit 02
3.64 MB
DWG
QUADEC E – Product Drawing – Dessin de Produit 02
3.64 MB
DWG
schlueter_cad_quadec_e_imp
6.38 KB
Pdf

Spec. Guides

product-spec-guide-2019
1.25 MB
Pdf

Especifique nuestros productos utilizando el

Specification Logo
Player

Watch & Learn
About the product

Cómo instalar un remate  para cantos de cerámica sobre paredes: Schluter®-QUADEC.

Cómo instalar un remate para cantos de cerámica sobre paredes: Schluter®-QUADEC.

08:51
Introducción los perfiles Schluter®

Introducción los perfiles Schluter®

03:41
Consejos para elegir la altura de su perfil en relación con su baldosa

Consejos para elegir la altura de su perfil en relación con su baldosa

03:28

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

Productos relacionados

Para paredes / Decorativo

Schluter®-QUADEC-FS

Para paredes / Bordes y esquinas exteriores

Schluter®-DECO-DE

Para paredes / Bordes y esquinas exteriores

Schluter®-INDEC

Para paredes / Bordes y esquinas exteriores

Schluter®-JOLLY

Para paredes / Decorativo

Schluter®-DESIGNLINE

Para paredes / Bordes y esquinas exteriores

Schluter®-RONDEC

Para paredes / Bordes y esquinas exteriores

Schluter®-FINEC-SQ