Schluter®-DILEX-BWS

Perfil de junta de superficie de PVC con zona de movimiento de 3/16"(5 mm) de ancho

Schluter® DILEX-BWS es un perfil de junta prefabricado con alas de fijación de PVC rígido que protege los bordes de la baldosa. Dispone de una zona de movimiento de CPE blando de 3/16" (5 mm) de ancho que separa los campos individuales en el revestimiento de baldosas y constituye la superficie visible.
  • Disponible en cuatro nuevos colores para simplificar la elección de la lechada a juego
  • Diseñado para permitir el movimiento y reducir las tensiones en superficies revestidas de grandes dimensiones
  • Elimina la necesidad de sellado
  • Previene las roturas y el astillamiento de las baldosas
  • Absorbe movimientos relativamente limitados y puede instalarse con mayor frecuencia para crear campos más pequeños
  • Adecuado para aplicaciones residenciales y comerciales de tráfico mediano sujetas a carga mecánicas livianas
  • La zona de movimiento de CPE está disponible en diferentes colores para coordinar con la lechada
 ...read more  ...show less

Tipo de producto

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-DILEX-BWS features trapezoid-perforated anchoring legs, made of recycled rigid PVC, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the soft chlorinated polyethylene (CPE) movement zone, which also forms the visible surface. The movement zone is only 3/16" (5 mm) wide, matching common grout joint widths. The profile absorbs relatively limited movements, given the width of the movement zone. This should be taken into account when evaluating the requirements for a specific application. If larger movements within the covering are anticipated, the DILEX-BWS may be installed with greater frequency to create smaller fields, or the DILEX-BWB (3/8", 10 mm movement zone) may be used.

DILEX-BWS is suitable for both residential and medium-duty commercial applications subject to light mechanical loads (e.g., offices and stores).

DILEX-BWS requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents.

1. Select the profile according to the tile thickness and format.

2. Using a notched trowel, apply thin-set mortar over the area where the profile is to be placed. The profile must align directly with movement joints in the substrate below.

3. Press the perforated anchoring legs of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring legs to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. A joint of approximately 1/16" - 1/8" (1.5 - 3 mm) should be left between the tile and the profile.

7. Fill the joint completely with grout or setting material.

Brochures and Pamphlets

profiles-usage-sheet
47.27 KB
Pdf

Articles

tileletter-tile-changed-showroom
375.36 KB
Pdf
tileletter-tiling-entryways-foyers-kerdi
4.35 MB
Pdf

Data sheets

Movement Joints Data Sheet
5.18 MB
Pdf

Product Table

movementjoint-profiles
2.34 MB
Pdf

Warranties

schluter-systems-movement-joints-and-cove-shaped-profiles-5-year-limited-warranty
210.53 KB
Pdf
Q:

How do I cut profiles?

A:

Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...

Read more
Player

Watch & Learn
About the product

Cómo instalar una junta de movimiento en baldosas: Schluter®-DILEX-BWS

Cómo instalar una junta de movimiento en baldosas: Schluter®-DILEX-BWS

04:48
Introducción los perfiles Schluter®

Introducción los perfiles Schluter®

03:41
Consejos para elegir la altura de su perfil en relación con su baldosa

Consejos para elegir la altura de su perfil en relación con su baldosa

03:28

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

Productos relacionados

Perfiles de junta de movimiento / Juntas de superficie y de dilatación

Schluter®-DILEX-F

Perfiles de junta de movimiento / Juntas de superficie y de dilatación

Schluter®-DILEX-BWB

Perfiles de junta de movimiento / Juntas perimetrales

Schluter®-DILEX-BWA

Perfiles media caña

Schluter®-DILEX-EKE

Desacoplamiento (DITRA)

Schluter®-DITRA & DITRA-XL

Perfiles de junta de movimiento / Juntas de superficie y de dilatación

Schluter®-DILEX-KSN

Perfiles de junta de movimiento / Juntas de superficie y de dilatación

Schluter®-DILEX-AKWS