Schluter®-KERDI-BOARD-SC
Prefabricated waterproof shower curb
- Designed to integrate with the Schluter®-Shower System
- Lightweight, stable, and load bearing
- Waterproof and ready to tile
- Multiple curbs can be installed adjacent to each other for larger showers
- Quick and easy to install
- Available in three sizes
Find recommended accessories here
KERDI-BOARD Estimator
Calculate your building panels for a quick and easy waterproof installation.
Schluter®-KERDI-BOARD-SC is a prefabricated shower curb, made of KERDI-BOARD, for use in conjunction with the Schluter®-Shower System. KERDI-SHOWER-SC is waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing. The curb can be used in conjunction with KERDI-SHOWER-T/-TS/-TT shower trays or mortar bases and is available in three sizes, 38" x 6" x 4-1/2" (97 x 15 x 11.5 cm), 48" x 6" x 4-1/2" (122 x 15 x 11.5 cm) and 60” x 6” x 4-1/2” (152 cm x 15 cm x 11.5 cm).
1. Apply Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar to the floor and to the edge of the shower base and walls using a 1/4" x 3/8" (6 mm x 10 mm) square- or U-notched trowel.
2. Press the curb firmly into place. Check the underside of the curb to ensure that full coverage and support is achieved.
3. Seal the curb to the shower base and walls using KERDI-BAND waterproofing strips and KERDI-KERECK preformed waterproofing corners.
For complete installation guidelines and warranty criteria for shower applications, please download the Schluter®-Shower System Installation Handbook below.
Brochures and Pamphlets
FAQ
Can the Schluter®-KERDI-BOARD-SC prefabricated shower curbs support the weight of a glass door or glass block wall?
Yes, these curbs will support these installations.
Do I install the Schluter®-KERDI-BOARD-SC shower curb or Schluter®-KERDI-BOARD-SB shower bench on top of or adjacent to the Schluter®-KERDI-SHOWER- T/-TS/-TT shower trays?
The KERDI-BOARD-SC shower curbs and KERDI-BOARD-SB shower bench are typically installed adjacent to the Schluter prefabricated shower tray...
Read moreWhat are the Schluter®-KERDI-SHOWER and Schluter®-KERDI-BOARD prefabricated substrates made of? Can they really support the tile assembly?
The KERDI-SHOWER prefabricated substrates are made of expanded polystyrene (EPS) foam with a high compressive strength...
Read moreCan the Schluter®-KERDI-BOARD-SC shower curb be trimmed to my desired size?
The Schluter®-KERDI-BOARD-SC shower curbs can be cut to length using a utility knife or a handsaw. To modify the height, remove the desired amount from the bottom of the curb using a utility knife...
Read more
Watch & Learn
About the product
How to install a shower curb: Schluter®-KERDI-BOARD-SC
Schluter® Shower in Less Than Three Hours
Tips & Tricks: How to Cut and Extend Trays, Curbs & Benches
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!
Watch more videos / playlists
