Schluter®-SHELF-E
Estante de esquina diseñado para paredes revestidas con baldosas
- Se ofrece en 3 formas: pentagonal, cuadrilátero y triangular
- Disponible en los siguientes diseños: FLORAL, CURVE, PURE, WAVE y SQUARE
- Todos los diseños están disponibles en 9 acabados TRENDLINE de aluminio con revestimiento de color texturizado, así como en acero inoxidable cepillado
- Incorpora lengüetas de fijación de 3/32" (2 mm) de grosor que se integran fácilmente en el patrón de la junta sin necesidad de taladrar.
- De fácil instalación tanto para aplicaciones nuevas como para renovaciones
- Rejillas a juego disponibles
Encuentre aquí los accesorios recomendados
Estimador para los sistemas de ducha
Haga una estimación de todo lo que necesita para su proyecto de ducha.
Schluter®-SHELF-E is a wall storage system available in brushed stainless steel or aluminum in a range of textured color-coated finishes including stone grey, pewter, cream, ivory, greige, bronze, dark anthracite, matte black, and matte white. The shelves are 5/32″ (4 mm) -thick and feature designs coordinating with the KERDI-DRAIN and KERDI-LINE drain grates. They can be used in showers and other tiled wall applications (e.g., kitchens and baths). SHELF-E is suitable for corner installations and available in three different shapes. It features 3/32″ (2 mm) -thick tabs that allow for installation with the tile or in retrofit applications.
Schluter®-SHELF-E requires no special maintenance or care and is resistant to mold and fungi. Clean shelves periodically using neutral cleaning agents. Avoid the use of strong acids (e.g., hydrochloric, hydrofluoric) and bases/alkaline cleaners (e.g., bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Even stainless steel requires periodic cleaning, which will maintain a neat appearance and reduce the risk of corrosion. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.
Corner - installation in conjunction with tile
1. Install the wall tile with joints 3/32″ (2 mm) wide or greater and clean the setting material from the joint where the SHELF-E will be installed.
2. Mark the tiles 3/8″ (10 mm) from the outside corners of the SHELF-E.
3. Install the grout, making sure to leave the area from the marks to the inside corner open.
4. After the grout has set, fill the open joint with sealant that is suitable for the application (e.g., silicone.)
5. Insert the SHELF-E and provide temporary support as required.
6. Seal the joint between the SHELF-E and the wall tile on the top and bottom surfaces with sealant that is suitable for the application (e.g., silicone.)
7. Allow the sealant to cure prior to using the SHELF-E.
Corner - retrofit
1. Determine the grout joint where the SHELF-E will be installed.
2. Mark the tiles where the SHELF-E tabs will be inserted.
3. Remove the grout from these locations using a suitable means (grout removal hand tool, oscillating tool, angle grinder, etc.). Take care not to damage the waterproofing layer behind the tile covering.
4. Fill the gaps in the joint with sealant that is suitable for the application (e.g., silicone.)
5. Insert the SHELF-E and provide temporary support as required.
6. Seal the joint between the SHELF-E and the wall tile on the top and bottom surfaces with sealant that is suitable for the application (e.g., silicone.)
7. Allow the sealant to cure prior to using the SHELF-E.
Folletos y panfletos
FAQ
Can the corner SHELF be installed in applications where Schluter®-DILEX profiles are installed at inside wall corners as well?
In general, yes. Depending on the specific DILEX profile, some applications may require a little extra effort than others...
Leer másWhat is the maximum load rating for the different shelves? Can I use a SHELF as a foot support while I’m shaving my legs in the shower?
We have designed and tested the shelves to ensure that they are suitable for the intended use...
Leer másHow do I care for my SHELF?
How can I install the SHELF-E when the inside wall corner is not square?
Do I have to apply sealant at the shelf-to-wall transitions or can I use grout instead?
The use of sealant at these transitions is required for two purposes. First, the material actually seals...
Leer másWhat kind of sealant should I use?
Ver y aprender
Acerca del producto
How to Install Schluter®-SHELF-E: Retrofit
How to install Schluter®-SHELF-E: Installation with Tile
Introducing Schluter®-SHELF
Encuentre tutoriales y videos de documentación de proyectos para aprender cómo sacar mejor provecho de nuestros productos, ¡empiece ahora y diviértase!
Ver más vídeos / listas de reproducción
