Schluter®-DILEX-AHKA

Cove-shaped profile for tile installations against existing surfaces

Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors.
  • Eliminates the need for caulking
  • Features a single trapezoid-perforated anchoring leg that is secured in the mortar bond coat and a dovetailed channel which is bonded to floor surfaces
  • Features a 3/8"(10 mm)-wide radius to prevent water penetration and dirt accumulation, making cleaning simple
  • Ideal for tiled environments with high sanitary requirements, such as commercial kitchens, bathrooms, and food processing plants
  • 90° and 135° inside and outside corners, and end caps available
  • Available in various finishes of anodized aluminum
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors. The profile features a single trapezoid-perforated anchoring leg that is secured in the mortar bond coat and a dovetailed channel, which can be bonded to floor surfaces using Schluter®-KERDI-FIX, epoxy resin, silicone, thin-set mortar, etc. A 3/8" (10 mm) radius cove section forms the visible surface and prevents the accumulation of dirt, making cleaning simple. DILEX-AHKA prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, and food-processing plants, or any tiled environment where a sanitary cove base is desired. DILEX-AHKA integrates with the DILEX-AHK and Schluter®-RONDEC profiles at 90° inside and outside vertical wall corners, respectively. Accessories for DILEX-AHKA include 90° and 135° inside and outside corners, and end caps.

DILEX-AHKA requires no special maintenance or care and are resistant to mold and fungi. Clean profile using common household cleaning agents. In the case of anodized aluminum do not use abrasive cleaning agents.

1. Select profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar over the area where the trapezoid-perforated anchoring legs will be placed.

Note: If necessary, fill the dovetailed channel of DILEX-AHKA with KERDI-FIX, epoxy resin, silicone, thin-set mortar or similar to adhere the profile to the existing floor surface.

3. Press the perforated anchoring leg(s) of the profile into the mortar.

Note: Install inside and outside corners, connectors, and end caps prior to setting tile. The use of thin-set mortar or similar may be required to achieve a proper fit.

4. Trowel additional thin-set mortar where the tiles are to be installed.

5. Solidly embed the tiles, ensuring full coverage and support of the tile edges, and align flush with the top of the profile, leaving a joint of approximately 1/16" – 1/8" (1.5 - 3 mm) between the tile and the profile.

6. Fill the joints completely with grout or setting material.

Articles

tileletter-tiling-entryways-foyers-kerdi
4.35 MB
Pdf

Warranties

MovementJointsandCoveShaped-Profiles-Warranty
57.92 KB
Pdf

Product Table

11203-preview
16.02 KB
CoveShaped_Profiles
2.87 MB
Pdf

Brochures and Pamphlets

Commercial Product Overview
5.34 MB
Pdf
Profile Brochure
2.14 MB
Pdf
Profile Finishes and Colors
2.45 MB
Pdf

Data sheets

Movement Joints Data Sheet
1.34 MB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

CAD drawings

schlueter_cad_dilex_ahka_imp
34.01 KB
Pdf
schlueter_cad_dilex_ahka_imp
78.87 KB
DWG
schlueter_cad_dilex_ahka_inst
50.77 KB
Pdf
schlueter_cad_dilex_ahka_metr
86.73 KB
DWG
schlueter_cad_dilex_ahka_inst
79.48 KB
DWG
schlueter_cad_dilex_ahka_metr
29.84 KB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

Cove-shaped Profiles

Schluter®-DILEX-AHK

Cove-shaped Profiles

Schluter®-DILEX-EKE

For Walls / Edging & Outside Wall Corners

Schluter®-RONDEC

Waterproofing

Schluter®-KERDI-FIX

Cove-shaped Profiles

Schluter®-DILEX-HKU

Cove-shaped Profiles

Schluter®-DILEX-EHK

Cove-shaped Profiles

Schluter®-DILEX-HKW

Cove-shaped Profiles

Schluter®-DILEX-PHK