Schluter®-RENO-T

Retrofit edge-protection profile for same-height, hard surface transitions

Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
  • Prevents tile edges from chipping
  • Ideal for floor installations where tile is bordered by wood, laminate, or other hard floor coverings
  • Designed for floor transitions in retrofit applications
  • In certain materials and sizes, the profile is flexible and can be used to form curves
  • Available in stainless steel, solid brass, and anodized aluminum
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-RENO-T is designed to provide transitions between existing same-height, hard-surface floor coverings (e.g., ceramic tile or natural stone, parquet flooring, concrete pavers, laminate, etc.), primarily in retrofit applications.

The profile is available in stainless steel, solid brass, and anodized aluminum. RENO-T is installed within the existing joint cavity and overlaps adjoining surface materials, thus preventing edges from becoming damaged when subjected to mechanical stress.

RENO-T, in brass and anodized aluminum size 9/14, is flexible in the lateral direction and can be used in curved applications.

The Schluter®-RENO-T profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Oxidation films on exposed solid brass or aluminum may be removed with a common polishing agent but will form again.  In the case of anodized aluminum, do not use abrasive cleaning agents.

1. Select the profile according to joint width, to ensure proper support of the lateral crosspiece.

2. The joint cavity must be at least 3/8" (9 mm) deep and free of debris. Substances that inhibit adhesion must be removed from the sides of the joint.

3. Fill the joint with elastomeric sealant such as Schluter®-KERDI-FIX or similar. Then insert the vertical leg of RENO-T in the joint so that the lateral crosspiece rests completely on the edges of the surface coverings.

4. Remove any excess sealant with a suitable cleaner.

Warranties

Floor-Profiles-Warranty
59.23 KB
Pdf

Product Table

10870-preview
16.72 KB
Profiles_Floors
778.1 KB
Pdf

Brochures and Pamphlets

Profile Finishes and Colors
2.45 MB
Pdf

Data sheets

Floor Profiles Data Sheet
1.12 MB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

CAD drawings

schlueter_cad_reno_t_metr
3.7 KB
Pdf
schlueter_cad_reno_t_inst
6.9 KB
Pdf
schlueter_cad_reno_t_inst
32.48 KB
DWG
schlueter_cad_reno_t_imp
33.33 KB
DWG
schlueter_cad_reno_t_metr
37.76 KB
DWG
schlueter_cad_reno_t_imp
3.82 KB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

How to install a tile transition on floors: Schluter®-RENO-T profile

How to install a tile transition on floors: Schluter®-RENO-T profile

03:40
Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to Flatten your Substrate for Schluter® Profiles

How to Flatten your Substrate for Schluter® Profiles

02:20

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Floors / Same-height Transitions

Schluter®-SCHIENE

For Floors / Same-height Transitions

Schluter®-DECO

Uncoupling (DITRA)

Schluter®-DITRA & DITRA-XL