Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two trapezoid perforated anchoring legs. It is used to fasten and stabilize structures made of KERDI-BOARD panels. It is attached to the substrate with either screws or thin-set mortar.
The Schluter®-KERDI-BOARD-ZW profile requires no special maintenance or care and is resistant to mold and fungi. Clean the profiles using common household cleaning agents. Stainless steel exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Do not use abrasive or alkaline cleaning agents.
KERDI-BOARD-ZW may be screw-mounted to the wall for reinforcement prior to KERDI-BOARD non-bearing wall system partition installation. KERDI-BOARD-ZW may also be included in the joints of non-bearing KERDI-BOARD partition systems for increased stabilty.
How do I cut profiles?
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...Read more
Schluter®-KERDI-BOARD: Product Overview: Panels, Profiles & Accessories
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!Watch more videos / playlists