Schluter®-KERDI-BOARD-SNLT
Shower niche with LIPROTEC LED lighting
- Waterproof and vapor-tight
- Integrated waterproof cable connection box
- Compliant with NEC and CEC codes
- Kit includes LIPROTEC LED light strip and profile
- Designed for vertical installation
- Available in three different sizes
- Larger size includes prefabricated, adjustable KERDI-BOARD shelf
Find recommended accessories here
KERDI-BOARD Estimator
Calculate your building panels for a quick and easy waterproof installation.
Schluter®-KERDI-BOARD-SNLT is a prefabricated shower niche made of KERDI-BOARD that incorporates a mounting profile with a diffused LED light strip. It features a pre-installed waterproof connection box to ensure the electrical connection is code-compliant. The KERDI-BOARD-SNLT can be installed in both KERDI and KERDI-BOARD wall assemblies. The shower niche features a 1/2" (12.5 mm) -thick by 2" (50 mm) -wide integrated bonding flange and is available in 12" x 12" (30 cm x 30 cm), 12" x 20" (30 cm x 51 cm), and 12" x 28" (30 cm x 71 cm) sizes and is designed for a vertical installation.
The mounting profile is made of anodized aluminum with satin finish (AE). It is 11.8" (300 mm) long to fit along the top of the niche and features a cut out designed to pass the cable through. The LED light strip is encased in a silicone tube that provides an evenly diffused line of light and nests into the mounting profile. The LED emits a warm white light measuring 3000K, with a brightness of 118 lumens.
The niche includes a stainless steel connection box and cover which are inserted into the waterproofed and factory assembled plastic connection box, ensuring a code-compliant LED system. Also included is a self-adhesive KERDI patch used for proper thin-set mortar adhesion and to prevent mortar from entering the connection box. It is not intended for waterproofing.
LIPROTEC LEDs and components require no special maintenance or care and are resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Oxidation films on aluminum may be removed with a conventional polishing agent, but the film will form again. In the case of anodized aluminum, do not use abrasive cleaning agents.
The LIPROTEC LED strips are designed for easy cleaning.
The LIPROTEC LED strip can be easily replaced.
Ready to install your Schluter®-KERDI-BOARD-SNLT niche? Check out the step-by-step installation instructions or view our comprehensive installation video below.
This product must be installed by a qualified person in accordance with the KERDI-BOARD-SNLT installation instructions and with the Canadian Electrical Code Part I (Canada) or the National Electrical Code (U.S.) as applicable. All electric connections must be made by a qualified person, according to the electrical and building codes effective in your region.
Brochures and Pamphlets
Handbooks
FAQ
What are the components I need to properly install my KERDI-BOARD-SNLT niche?
Once the LIPROTEC LED is installed into the mounting profile, how do you get it out safely if needed?
The LED can be removed from the mounting profile, and you can test its operation without fully installing directly into place. Removal of the LED can be...
Read moreDo we need to use all three LIPROTEC components? Can I use another driver, LED, or wire?
The LIPROTEC system is specifically designed to work together and is UL listed as a system. The cable and gland seal the wire outlet hole. The LED connectors are...
Read moreAre the components of the LIPROTEC system replaceable?
Yes. The LED can easily be replaced by removing it from the mounting profile. NEC/CEC requires the drivers to be accessible, so they can also be...
Read moreCan KERDI-BOARD-SNLT be installed in a steam shower?
DO NOT install the KERDI-BOARD-SNLT in a commercial, continuous-use steam room or shower. For residential, intermittent-use steam shower applications, please contact...
Read moreWhat if I lose the KERDI patch for my KERDI-BOARD-SNLT niche?
A piece of Schluter®-KERDI-BAND can be cut to 3-3/16" x 4-3/4"-6" (88 x 120-150 mm) and substituted. Use Schluter®-Thinset or Schluter®-KERDI-FIX to hold in place...
Read moreWhat should I do if I'm having difficulty inserting the LIPROTEC LED into the mounting profile or above the tiles at the ends?
The mounting profile and end areas must be free of any debris, grout or thin-set. Review all areas for obstructions. Remove with a pick or scraping tool before...
Read moreWhy isn't my LIPROTEC LED lighting up or is flickering?
Incorrect or poor wiring connection. The polarity of low voltage V+ (RED) and V-(Black) are reversed OR the circuit breaker is off or tripped. Recheck all connections.
Read moreWhat is included in my KERDI-BOARD-SNLT kit?
The niche kit includes: Prefabricated shower niche made of KERDI-BOARD with pre-installed waterproof connection box for a code-compliant installation...
Read moreThe LED is sticky from dirt or thin-set/grout dust and is difficult to insert to the profile.
Clean the LED with soapy water. This same solution can be done using a spray bottle to help lubricate the interface between...
Read more
Evaluations and Listings
UL2108 (US), CSA-C22.2 No. 250.2 (Canada) - Low-voltage Lighting Systems, Power Units, Luminaires and Fittings, E530823 - Certified for the US & Canada LED Strips Suitable for Wet Locations - IP 67 Rating
Watch & Learn
About the product
How to install the Schluter®-KERDI-BOARD-SNLT with LIPROTEC LED Lighting
See your shower in a whole new light with Schluter®-KERDI-BOARD-SNLT with LIPROTEC Lighting!
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!
Watch more videos / playlists
