Schluter^®-DITRA-PS

DITRA-PS is a peel and stick membrane that features a pressure sensitive adhesive (PSA) to bond the membrane to the substrate, replacing the need for thin-set mortar. The -PS version offers the same core functions as DITRA.

Storage: DITRA-PS features a UV sensitive pressure-sensitive adhesive that should not be stored in places with prolonged exposure to direct sunlight. The PSA is also temperature sensitive and should be stored in a frost-free environment 41 - 86 °F (5 - 30 °C). If product is exposed to conditions outside of recommended temperature range, product shall be re-acclimated to range for a minimum of 24 hours. The PSA is not water soluble and is free of solvents.

All substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-PS. For complete installation guidelines and warranty criteria, please refer to the downloadable Schluter®-DITRA Installation Handbook or to the installation video online. 
Note: Type, thickness, and format of the tile or stone surface covering must be suitable for the intended application. Minimum tile format is 2" x 2" (5 cm x 5 cm). 

1. Remove release liner from DITRA-PS membrane. 

2. Apply peel and stick membrane to the floor, fleece/adhesive side down. Solidly embed the matting into the substrate using a float, screed trowel, or DITRA-ROLLER. Proper installation results in full contact between the adhesive and substrate beneath. 
* When using the DITRA-ROLLER, place a weight (e.g., bags of mortar/grout or box of tile) not to exceed 75 lbs on the DITRA-ROLLER shelf. Slowly move the roller from one end of the matting to the other, slightly overlapping successive passes. 

3. Abut end and side sections of adjacent sheets. 

For optimal performance of peel and stick membranes with difficult-to-bond-to substrates, use Schluter®-PRIMER-PS, Schluter®-PRIMER-U, or other primer suitable for the application. Refer to Schluter-PRIMER-PS or Schluter-PRIMER-U technical data sheet or contact Schluter-Systems for more information on primer applications.