Menu
Schluter®-BEKOTEC-BRS
The Schluter®-BEKOTEC-BRS is an edge strip for conventional screed systems at floor/wall transitions or fixed building elements.
- Roll measures 164' (50 m) long
- Dimensions of strip are 3-1/8" (8 cm) wide and 5/16" (8 mm) thick
- Made of polyethylene foam with an integrated foil leg
The Schluter®-BEKOTEC-BRS is an edge strip for conventional screed systems at floor/wall transitions or fixed building elements.
- Roll measures 164' (50 m) long
- Dimensions of strip are 3-1/8" (8 cm) wide and 5/16" (8 mm) thick
- Made of polyethylene foam with an integrated foil leg
Specify & Price
Add to
Project Dealer
Locator Product
Table
Project Dealer
Locator Product
Table
Product successfully added to Project List
You can now access your Project List or stay on this page
Go to Project List Continue browsing
Schluter®-BEKOTEC-BRS
Edge strip for conventional screeds
The Schluter®-BEKOTEC-BRS is an edge strip for conventional screed systems at floor/wall transitions or fixed building elements.
At the perimeter, where the covering meets walls or restraining surfaces, place the 5/16" (8 mm)-thick edge strip, Schluter®-BEKOTEC-BRS or -BRSK. The edge strips feature an integrated foil that must be carried over the separating layer covering the insulation.Note: For complete system installation guidelines and warranty criteria you can also view the downloadable PDF of copy of the Schluter®-Modular Screed Systems Technical Data Sheet.
BEKOTEC products do not rot and require no special maintenance.
Downloads
Warranties
- ModularScreed-Panels-Warranty.pdf
- 0.05 MB
Data sheets
- Modular Screed Data Sheet.pdf
- 0.34 MB
Architectural Material
Spec. Guides
- Product Spec Guide 2019.pdf
- 1.25 MB
Specify our products using the
