Schluter®-DILEX-HKS
Stainless steel cove-shaped profile for floor/wall transitions
- Designed to allow movement and reduce stress in large, tiled areas
- Eliminates the need for caulking
- Prevents cracking and delamination of tiles
- Features a soft, thermoplastic rubber movement zone to absorb larger movements at floor/wall transitions and inside wall corners
- Features a 23/32"(18.5 mm)-wide radius to prevent accumulation of dirt and make cleaning simple
- Outside corners, 2-way and 3-way inside corners, connectors, and end caps are available
- Available in stainless steel 316L (1.4404 = V4A); contact Customer Service for pricing and availability
- 90°outside corners with pre-cut profile sections are available by special order
Find recommended accessories here
Profile Estimator
Discover what you need for tile protection and easy transitions.
Schluter®-DILEX-HKS features a soft, thermoplastic rubber movement zone that is attached to the profile via rigid rubber grip bars to absorb larger movements at floor/wall transitions and at inside wall corners. DILEX-HKS prevent surface water penetration and meet the maintenance and hygienic requirements of commercial kitchens, bathrooms, food-processing plants, and hospitals, or any tiled environment where a sanitary cove base is desired. Accessories for both DILEX-HKS include: inside and outside corners, connectors, and end caps. Also available by special order are 90° outside corners with 6” (150 mm) pre-cut profile sections.
DILEX-HKS requires no special maintenance or care and are resistant to mold and fungi. Clean profile using common household cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. The thermoplastic rubber inserts in DILEX-HKS are replaceable.
1- Seleccione el perfil de acuerdo con el formato y espesor de la baldosa.
2- Utilizando una llana dentada, aplique mortero de capa fina en el área donde ubicará las alas de fijación perforadas en forma trapezoidal.
3- Presione las alas de fijación perforadas del perfil en el mortero.
Nota: instale las esquinas interiores y exteriores, los conectores y los tapones terminales antes de instalar la baldosa. Los accesorios de DILEX-HKS se aplican utilizando un adhesivo permanente elástico e impermeable (por ej., KERDI-FIX o silicona). Antes de la aplicación, quitar todo resto de sustancia que inhiba la adhesión (por ej., grasa). Los conectores deben superponerse con el perfil al menos 3/8" (10 mm).
4- Aplique con la llana una cantidad adicional de mortero de capa fina donde instalará las baldosas.
5- Incruste sólidamente las baldosas asegurándose una cobertura y soporte total de los bordes de las baldosas y que queden alineadas a ras del borde superior del perfil, dejando una junta de aprox. 1/16"- 1/18" (1,5- 3 mm) entre la baldosa y el perfil.
6- Rellene las juntas completamente con lechada o material de fraguado.
FAQ
¿Cómo corto los perfiles?
Los perfiles Schluter® están disponibles en diferentes materiales, por lo que los métodos de corte varían. A continuación, se indican las mejores prácticas de corte según...
Read moreCAD drawings
Especifique nuestros productos utilizando el
Watch & Learn
About the product
Cómo instalar un perfil de escocia: Schluter®- DILEX-HKS
Introducción los perfiles Schluter®
Consejos para elegir la altura de su perfil en relación con su baldosa
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!
Watch more videos / playlists
Perfiles de junta de movimiento / Juntas de movimiento para esquinas interiores
Schluter®-DILEX-BTO
Perfiles de junta de movimiento / Juntas de superficie y de dilatación
Schluter®-DILEX-KSN