Schluter®-TREP-V
Perfil de aluminio anodizado para escaleras con banda de rodadura antideslizante de PVC texturado
- Specially textured PVC tread with slip-resistant design in all directions provides safety on tiled stairs prevents dirt from accumulating
- Tread insert is replaceable and offered in a variety of colors to produce contrasting, high visibility options
- Available with either a narrow (TREP-V 42) or wide (TREP-V 60) tread
- Prevents tile edges on stairs from chipping
- End caps are also available for TREP-V
Encuentre aquí los accesorios recomendados
Estimador de perfiles
Descubra lo que necesita para proteger las baldosas y facilitar las transiciones.
Schluter®-TREP-V is an anodized aluminum profile with a PVC tread designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface. The PVC tread is available in a variety of colors to provide contrast and can be replaced in case of damage or wear. TREP-V is available with either a narrow (TREP-V 42) or wide (TREP-V 60) tread. Matching end caps are also available.
The Schluter®-TREP-V require no special maintenance or care and are resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents.
The treads of TREP-V can be replaced in case of damage or wear.
1. Select profile size according to tile thickness and format.
2. Install riser tile flush with the stair tread surface.
3. Using a notched trowel, apply thin-set mortar along the edge area above the riser.
4. Fill cavities on the underside of the profile with thin-set mortar.
5. Press the trapezoid-perforated anchoring leg of the profile into the thin-set mortar, making sure the front edge of the support section is aligned flush with the riser tile. Full coverage must be obtained at the edge area to ensure support of the profile.
6. Trowel additional thin-set mortar over the anchoring leg and the stair tread surface to ensure full coverage and support of the tile edges.
7. Solidly embed the tread tiles so that the tiled surface is flush with the top of the profile.
8. A joint of approx. 1/16" - 1/8" (1.5 -3 mm) should be left between the tile and the profile.
9. Fill joint completely with grout or setting material.
Ver y aprender
Acerca del producto
Introducing the stair nosing profile, Schluter®-TREP-V
Encuentre tutoriales y videos de documentación de proyectos para aprender cómo sacar mejor provecho de nuestros productos, ¡empiece ahora y diviértase!
Ver más vídeos / listas de reproducción
