Schluter®-JOLLY

Finishing and edge-protection profile for outside wall corners and edges

Schluter®-JOLLY is a finishing and edge-protection profile for the outside corners of tiled surfaces on walls. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings.
  • New! Now available in 10’ (3.05 m) lengths
  • Prevents tile edges from chipping
  • Ideal for creating decorative transitions on walls
  • Ideal trim for the top edge of a tiled wall, backsplash, and bathtub surround
  • Features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile
  • Anchoring leg is available with a radius perforation so that the profile can be used to form curves
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-JOLLY is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and an 87° sloped vertical wall section that provides a decorative finish and protects adjacent tiles. The profile is available in chrome-plated solid brass, color-coated aluminum, textured color coated aluminum, anodized aluminum and PVC. Schluter®-SCHIENE features the same design as JOLLY and is also available in solid brass, aluminum, and stainless steel. Please see the Schluter®-Systems Illustrated Price List for more details.

The range of available sizes and finishes permits the matching of JOLLY to a wide variety of tile and grout colors and allows many design opportunities through the use of contrasting colors. Other applications include transitions for other coverings such as carpet, natural stone, or cold-cured resin coatings. The integrated joint spacer establishes a defined joint cavity between the tile and the profile.

The Schluter®-JOLLY profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents.

Oxidation films on exposed aluminum can be removed by using a conventional polishing agent, but will form again.

In the case of chrome-plated brass, anodized aluminum and color-coated aluminum, do not use abrasive cleaning agents.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the JOLLY profile is to be used as an edging for an outside wall corner, finish tiling one wall first then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Product Table

10868-preview
22.4 KB
Profiles_Walls
2.25 MB
Pdf

Data sheets

Floor Profiles Data Sheet
350.17 KB
Pdf
Wall and Countertop Profiles Data Sheet
4.45 MB
Pdf
Gauged porcelain tile panels detail
5.27 MB
Pdf

Brochures and Pamphlets

Profile Brochure
3.73 MB
Pdf

Warranties

WallandCountertop-Profiles-Warranty
10.13 MB
Pdf
Floor-Profiles-Warranty
59.23 KB
Pdf
BalconyandTerrace-Profiles-Warranty
57.34 KB
Pdf
Q:

How do I cut profiles?

A:

Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...

Read more
Q:

What is the difference between Schluter®-JOLLY and Schluter®-SCHIENE profiles?

A:

JOLLY and SCHIENE feature the same design. SCHIENE is designed to provide edging for tile coverings...

Read more

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

CAD drawings

schlueter_cad_jolly_imp
62.4 KB
DWG
schlueter_cad_jolly_imp
8.29 KB
Pdf
schlueter_cad_jolly_metr
64.03 KB
DWG
schlueter_cad_jolly_inst
28.44 KB
DWG
schlueter_cad_jolly_inst
8.48 KB
Pdf
schlueter_cad_jolly_metr
7.64 KB
Pdf

Specify our products using the

Specification Logo

Watch & Learn
About the product

How to Tile a Niche with Schluter® Profiles

How to Tile a Niche with Schluter® Profiles

11:29
Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10
Best practices for cutting Schluter®-Systems Profiles

Best practices for cutting Schluter®-Systems Profiles

03:46
Maintenance for Schluter® Shower Drains & Schluter® Profiles

Maintenance for Schluter® Shower Drains & Schluter® Profiles

02:21

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Walls / Edging & Outside Wall Corners

Schluter®-RONDEC

For Walls / Edging & Outside Wall Corners

Schluter®-QUADEC

For Walls / Edging & Outside Wall Corners

Schluter®-FINEC

For Walls / Edging & Outside Wall Corners

Schluter®-DECO-DE

For Stairs / Cover the Sub-Assembly

Schluter®-SCHIENE-STEP

For Walls / Edging & Outside Wall Corners

Schluter®-INDEC

For Walls / Decorative

Schluter®-DESIGNLINE