Schluter^®-JOLLY

Schluter®-JOLLY es un perfil de acabado y de protección de bordes para las esquinas exteriores de las superficies de paredes revestidas con baldosas. Presenta un ala de fijación perforada trapezoidalmente que se fija en la capa de adherencia del mortero debajo de la baldosa, y una sección vertical de 90° en la pared que proporciona un acabado decorativo y protege las baldosas adyacentes. El perfil está disponible en latón macizo cromado, aluminio con revestimiento de color, aluminio con revestimiento de color texturizado, aluminio anodizado y acero inoxidable.

La gama de tamaños y acabados disponibles permite combinar JOLLY con una amplia variedad de colores de baldosas y lechadas y ofrece muchas oportunidades de diseño mediante el uso de colores contrastados. Otras aplicaciones incluyen las transiciones para revestimientos de pedestales, como la piedra natural, o los revestimientos de resina fraguados en frío. El separador de juntas integrado establece una cavidad de junta definida entre la baldosa y el perfil.

Nota: JOLLY en acero inoxidable no incorpora el separador de juntas integrado en la dirección vertical de la pared. Hay disponibles esquinas exteriores a juego y conectores para los perfiles contiguos.

The Schluter®-JOLLY profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Oxidation films on exposed aluminum may be removed with a common polishing agent but will form again.

In the case of chrome plated brass, anodized aluminum, color coated aluminum and textured color-coated aluminum, do not use abrasive cleaning agents.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the JOLLY profile is to be used as an edging for an outside wall corner, finish tiling one wall first then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: For installation of JOLLY corners: Install using JOLLY corner connector pin. The corner connector pin has one end with a snap feature to lock into the corner piece, with the opposite end featuring a spring function that engages with the channel of the JOLLY profile. The corner connector pin is first snapped into the corner piece, then slid into the profile channel for installation. Refer to assembly instructions on the corner packaging.