Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated sloped shower trays designed for KERDI-LINE linear drain
- Waterproof and ready to tile
- Features integrated KERDI waterproofing
- Prevents mold and mildew growth
- Reduces weight and installation time
- Made of lightweight, expanded polystyrene
- Floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities
- Designed for use with the KERDI-LINE linear drain (sold separately)
- Available in ten configurations with center drain and perimeter drain placements with reduced perimeter heights that simplifies construction of curbless showers
Find recommended accessories here
Shower System Estimator
Calculate all you need for your shower project.
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated expanded polystyrene sloped trays with integrated KERDI waterproofing specifically designed to accept the KERDI-LINE linear drain. The trays are available in 39" x 39" (100 cm x 100 cm), 55" x 55" (140 cm x 140 cm), 48” x 48” (122 cm x 122 cm), 36” x 72” (91 cm x 183 cm), 38” x 76” (97 cm x 193 cm) and 36” x 55” (91 cm x 140 cm) sizes. The KERDI-SHOWER-LT/-LTS are available with center (-LT) and perimeter (-LTS) drain placements in ten configurations with reduced perimeter heights to aide in the installation of curbless showers.
1. Any leveling of the floor must be done prior to the installation of the shower tray. If necessary, cut the tray to size prior to application. The shower base can also be extended beyond the tray using dry-pack mortar, which is in turn covered with the KERDI membrane.
2. Cut the flat end of the KERDI-SHOWER-LT/-LTS tray to fit around the channel support. Apply Schluter SET™, Schluter ALL-SET™, Schluter FAST-SET™, or unmodified thin-set mortar to the substrate using a 1/4" x 3/8" (6 mm x 10 mm) square- or U-notched trowel. Slide the KERDI-SHOWER-LT/-LTS under the edge of the channel body flush with the surface of the channel support, making certain to solidly embed the tray in the mortar. Check the underside of the tray to ensure that full coverage is achieved.
Note: When KERDI-LINE is placed at an intermediate location (e.g., center of shower), it is recommended that the KERDI SHOWER-LT tray be cut by equal amounts from the ends to ensure a consistent height of the first course of tile. When KERDI-LINE is placed adjacent to a wall, cut the KERDI-SHOWER-LTS tray from the thicker end to ensure a flush transition at the drain.
Brochures and Pamphlets
FAQ
¿Qué grosor tienen las bandejas de ducha Schluter-KERDI-SHOWER?
A continuación, se muestran las tablas con las dimensiones y altura perimetral de cada una de las bandejas de ducha KERDI-SHOWER-T/-TS/-TT,…
Read more¿De qué están hechos los substratos prefabricados Schluter®-KERDI-SHOWER y Schluter®-KERDI-BOARD? ¿Pueden realmente soportar el ensamblado de baldosas?
Los substratos prefabricados KERDI-SHOWER están hechos de espuma de poliestireno expandido (EPS) con una alta resistencia a la compresión...
Read more¿Cuál es el orificio más grande que puedo hacer en el substrato para el drenaje?
El diámetro máximo es de 5"". En la caja del kit de drenaje se incluye una plantilla para guiar la aplicación.
Evaluación y listados de productos
Schluter®-KERDI-SHOWER-LT/-LTS está listado por cUPC® Schluter®-KERDI-SHOWER-LT/-LTS está listado por ICC-ES - PMG-1204
Watch & Learn
About the product
Cómo instalar el desagüe lineal Schluter®-KERDI-LINE
Cómo instalar el sistema eléctrico de calefacción para pisos DITRA-HEAT en una ducha
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!
Watch more videos / playlists
