Ease of Access

Add image to project

 

This custom vanity has been created using KERDI-BOARD to easily accommodate wheelchair access. The tiled structure is framed with RONDEC profiles in sand pebble finish. The recessed sink features the KERDI-LINE linear drain with the SOLID grate in stainless steel. DITRA-HEAT warms the bathroom tile while preventing it from cracking.

Add image to project

 

KERDI-BOARD-SB prefabricated triangular bench is trimmed with the RONDEC profile in sand pebble. DILEX-EKE joins the shower floor to the wall.

Add image to project

 

The KERDI-BOARD-SB rectangular shower bench tucks away nicely in the nook of the shower. The KERDI-BOARD-SN shower niche, as well as the bench, are framed with the RONDEC profile. KERDI provides effective waterproofing from beneath the tile.

Add image to project

 

The KERDI-BOARD-SB rectangular shower bench, which is framed using the RONDEC proflile, tucks away nicely in the nook of the shower.

Add image to project

 

A convenient mosaic shelf was created using 2" KERDI-BOARD and framed with the RONDEC profile in sand pebble.

Add image to project

 

A convenient mosaic shelf was created using 2" KERDI-BOARD and framed with the RONDEC profile in sand pebble.

Add image to project

 

The custom KERDI-BOARD vanity is framed with the RONDEC profile and corner pieces in sand pebble. Seams sealed by KERDI-BAND.

Add image to project

 

The outside corner of this tile wall with mosaic feature strip is trimmed with RONDEC in sand pebble.

Add image to project

 

The custom tile vanity and sink were created using KERDI-BOARD universal building panels. The sink features a KERDI-LINE drain with a SOLID grate in stainless steel. The vanity is framed with the RONDEC profile in sand pebble. Seams sealed by KERDI-BAND.

Add image to project

 

This shelf was created using 2" KERDI-BOARD and framed with RONDEC in sand pebble.

Add image to project

 

This welcome tile bathroom was created to allow for wheelchair access. The custom KERDI-BOARD vanity features the KERDI-LINE linear drain and the RONDEC trim profile, including corner pieces.

Add image to project

 

This custom shower features the KERDI-SHOWER-R shower ramp which creates a smooth transition between the shower floor and general floor area. The SHOWER-PROFILE-WSK-EK acts as a splashguard at the entrance of this curbless shower, keeping splashes contained and allowing for wheelchair accessibility.

/

Products used in this project:

Schluter®-KERDI-BOARD

Schluter®-
KERDI-BOARD

Waterproof, multifunctional tile substrate and building panel

Schluter®-KERDI-BOARD-SB

Schluter®-
KERDI-BOARD-SB

Prefabricated waterproof shower bench

Schluter®-RONDEC

Schluter®-
RONDEC

Finishing and edge-protection profile with a rounded reveal surface

Schluter®-DITRA-HEAT

Schluter®-
DITRA-HEAT

Uncoupling membrane for DITRA-HEAT-E-HK electric floor heating cables

Schluter®-DILEX-EKE

Schluter®-
DILEX-EKE

Movement joint profile for inside wall corners, floor/wall transitions

Schluter®-KERDI

Schluter®-
KERDI

Bonded waterproofing and vapor-retardant membrane

Schluter®-KERDI-BAND

Schluter®-
KERDI-BAND

Waterproofing strip seals abutting joints of membranes and building panels

Schluter®-KERDI-SHOWER-R

Schluter®-
KERDI-SHOWER-R

Prefabricated shower ramp

Schluter®-SHOWERPROFILE-WS/-WSK

Schluter®-
SHOWERPROFILE-WS/-WSK

Profile that forms a splashguard in curbless showers