Terms and Conditions
By accessing the Website, you agree to be bound by and comply with these Terms of Use, which is a legally binding agreement between you and Schluter.
Search Results for
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZS/-ZT
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to metal or wood stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.
KERDI-BOARD-ZS are coarse thread screws used to fasten KERDI-BOARD to wood stud framing with the corresponding washers.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Drains / Adaptor Drains
Schluter®-KERDI-DRAIN-A
Schluter®-KERDI-DRAIN-A
Drains / Adaptor Drains
Schluter®-KERDI-DRAIN-A
The Schluter®-KERDI-DRAIN-A adaptor kits are designed to convert clamping ring drains by equipping them with an integrated bonding flange.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SB
Schluter®-KERDI-BOARD-SB
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SB
Schluter®-KERDI-BOARD-SB is a lightweight, waterproof, prefabricated shower bench made of KERDI-BOARD that is designed to integrate with the Schluter®-Shower System.
For Stairs / Cover the Sub-Assembly
Schluter®-RONDEC-STEP
Schluter®-RONDEC-STEP
For Stairs / Cover the Sub-Assembly
Schluter®-RONDEC-STEP
Schluter®-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The top of the profile features a symmetrically rounded edge that matches the RONDEC profile, while the vertical leg of the profile hides the exposed edge of the sub-assembly.
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
For Walls / Edging & Outside Wall Corners
Schluter®-QUADEC-K
Schluter®-QUADEC-K
For Walls / Edging & Outside Wall Corners
Schluter®-QUADEC-K
Schluter®-QUADEC-K is a variant of the QUADEC profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly.
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW is a PVC cove-shaped profile for inside wall corners and floor/wall transitions in applications where limited movement is expected.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-V
Schluter®-KERDI-BOARD-V
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-V
Schluter®-KERDI-BOARD-V is a vertically grooved substrate and building panel for creating rounded and curved elements–without the need for wood or metal framing.
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
Schluter®-TREP-FL
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
The Schluter®-TREP-FL is a decorative stair-nosing profile with a protruding rounded edge that can be integrated into stairs covered with tile or stone.
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts.
Q:
Why isn't my LIPROTEC LED lighting up or is flickering?
A:
Incorrect or poor wiring connection. The polarity of low voltage V+ (RED) and V-(Black) are reversed OR the circuit breaker is off or tripped. Recheck all connections.
Read more
Q:
What if my LIPROTEC LED turns on but doesn't dim?
A:
The slider is misaligned. Remove the faceplate on the ECX. Slide the black dimming lever on the ECX housing to the bottom and the face plate slider to...
Read more
Q:
I have verified a 120V input to my power supply and 24V output but my LIPROTEC LED still does not illuminate. What should I do?
A:
Ensure that the low voltage (+ and -) connections are correct and not reversed. The connections should be...
Read more
