Peel & Stick DITRA-HEAT Membranes
Schluter®-DITRA-HEAT-PS and DITRA-HEAT-DUO-PS are peel and stick membranes, so are simple to use and take a fraction of the time to install.
Search Results for
Cables
DITRA-HEAT-E-HK
DITRA-HEAT-E-HK
Cables
DITRA-HEAT-E-HK
Schluter®-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications.
Uncoupling (DITRA)
DITRA-HEAT-DUO-PS
DITRA-HEAT-DUO-PS
Uncoupling (DITRA)
DITRA-HEAT-DUO-PS
Schluter®-DITRA-HEAT-DUO-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-DUO-PS is an uncoupling membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with of DITRA-HEAT-HK floor heating cables to create a warm tiled floor.
Cables
DITRA-HEAT-E-HK-RK
DITRA-HEAT-E-HK-RK
Cables
DITRA-HEAT-E-HK-RK
Schluter®-DITRA-HEAT-E-HK-RK is a repair kit for DITRA-HEAT-E-HK heating cables. The kit contains all the material to replace one section of heating cable (grey section) up to 10" (25 cm) long or less in the event of damage, such as cuts by other trades during installation.
Cables
DITRA-HEAT-E-HK-SK
DITRA-HEAT-E-HK-SK
Cables
DITRA-HEAT-E-HK-SK
Schluter®-DITRA-HEAT-E-HK-SK is a splice kit for DITRA-HEAT-E-HK heating cables. The kit contains all the material to replace one factory splice of the heating cable.
TROWEL
TROWEL
Schluter trowels are engineered to support proper mortar coverage and efficient installation across Schluter membranes and shower components. Square-notched trowels are designed for installing DITRA, KERDI, and DITRA-HEAT membranes, while the U-notched MULTI-TROWEL is intended for installing shower trays, benches, and curbs.
Waterproofing
KERDI-KM
KERDI-KM
Waterproofing
KERDI-KM
Schluter®-KERDI-KM is a pre-cut collar of the KERDI waterproofing membrane designed to seal around pipes or other similar elements through KERDI or DITRA/DITRA-XL membranes.
PRIMER-PS
PRIMER-PS
PRIMER-PS is a ready-to-use, quick-drying topical primer designed specifically for Schluter’s peel and stick membranes. It is formulated to enhance the bond of peel and stick membranes to difficult-to-bond-to surfaces such as OSB, plywood, gypsum concrete, or vinyl. PRIMER-PS can be used in interior applications where increased adhesion is required over various porous and non-porous substrates.
Waterproofing (KERDI)
KERDI-BAND
KERDI-BAND
Waterproofing (KERDI)
KERDI-BAND
Schluter®-KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with KERDI and DITRA membranes and KERDI-BOARD building panels.
Waterproofing
KERDI-KERECK-F/-KERS-B
KERDI-KERECK-F/-KERS-B
Waterproofing
KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK and KERDI-KERS-B are preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
Waterproofing (KERDI)
KERDI-FLEX
KERDI-FLEX
Waterproofing (KERDI)
KERDI-FLEX
Schluter®-KERDI-FLEX is a flexible polyethylene waterproofing strip used to seal movement joints over DITRA in specialty applications where large movements are expected, i.e. over expansion joints or construction joints.
Drains / Floor Drains
KERDI-DRAIN-F
KERDI-DRAIN-F
Drains / Floor Drains
KERDI-DRAIN-F
Schluter®-KERDI-DRAIN-F is a floor drain specifically designed for use in tiled floors in conjunction with Schluter®-DITRA and DITRA-HEAT membranes to provide reliable drainage. It is ideal for wet rooms, laundry rooms, bathroom floors, and other applications that require waterproofing and drainage. Protect floors and moisture-sensitive building structures by installing a secondary drain in areas at risk of water exposure.
Waterproofing
KERDI-SEAL-PS/-MV
KERDI-SEAL-PS/-MV
Waterproofing
KERDI-SEAL-PS/-MV
Schluter®-KERDI-SEAL-PS and Schluter®-KERDI-SEAL-MV are prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.
DITRA 2.0: Now even better
DITRA provides the 4 essential functions that ensure the durability of tiled floors: uncoupling, waterproofing, load support, and vapor management. A convenient alternative to cement backer board or plywood and OSB, DITRA is thin, lightweight, and quick and easy to install.
Schluter®-DITRA: The original. Now even better
In 1987, Schluter Systems revolutionized the tile industry with the introduction of DITRA, the original uncoupling membrane designed to prevent cracked tile and grout. Today, DITRA is even better. The same, trusted, and reliable uncoupling membrane now features innovative enhancements that will help get the job done even faster.
17 New Cable Length Options for DITRA-HEAT
There are now double the number of cable lengths available for the Schluter-Systems DITRA-HEAT floor warming system. The DITRA-HEAT system is unique because the heating cables are easily snapped into place on top of the uncoupling mat with no clips or fasteners.
Q:
If I use a self-leveler on my plywood subfloor, which type of thin-set mortar do I used to install Schluter®-DITRA or DITRA-XL?
A:
We recommend Schluter SET™ , ALL-SET™ , FAST-SET™, or unmodified thin-set mortar on a floor that has been leveled with a self-leveling product.
Read more
Q:
What should the consistency of the mortar be to set Schluter® membranes (e.g., KERDI, DITRA, DITRA-HEAT) compared to the consistency of the mortar for setting tile?
A:
For membrane installation, the mortar should be mixed to a fairly fluid consistency, but still be able to hold a...
Read more
Q:
Can Schluter®-DITRA-HEAT-E-HK heating cables be installed on walls?
