Schluter^® Thin-set Mortar

Made by Schluter, for Schluter products

The line of Schluter thin-set mortar is designed by Schluter, for Schluter products. All Schluter Systems’ thin-set mortars, including the ALL-SET and FAST-SET modified varieties can be used to set tile over Schluter®-DITRA, DITRA-HEAT, KERDI, and KERDI-BOARD products.

Workability

• Sag resistant
• Smooth and creamy
• Easy to handle and spread

Applications

• Large and heavy tile (LHT)
• Floors and walls
• Natural stone, ceramic (incl. porcelain)

Guaranteed Compatibility

• Providing “single source” supply
• No need to rely on third-party mortars
• No more finger-pointing!

Coverage

Values are approximate

Suitable Uses

• For Schluter Systems® applications, refer to the Schluter®-DITRA®, Schluter®-DITRA-HEAT®, and Schluter®-Shower System Installation Handbooks.
• For other applications, refer to TCNA Handbook for Ceramic, Glass, and Stone Tile Installation and TTMAC Specification Guide 09 30 00 Tile Installation Manual.
• Not recommended for moisture-sensitive stone, resin-backed tile, or glass tile.

Mixing Instructions

Working properties – At 70°F (21°C), working properties will vary based on jobsite conditions.
Open time: 20-30 minutes Pot life: 2-4 hours Time to grout: 12 hours Time to heavy traffic: 24 hours

Working properties – At 70°F (21°C), working properties will vary based on jobsite conditions.
Open time: 20-30 minutes Pot life: 2-4 hours Time to grout: 12 hours Time to heavy traffic: 24 hours

Working properties – At 70°F (21°C), working properties will vary based on jobsite conditions.
Open time: 10 minutes Pot life: 30 minutes Time to grout: 4 hours Time to heavy traffic: 24 hours

Lower Carbon Footprint

Lower Carbon Footprint products have been revised to decrease their global warming potential. Examples of these projects include increasing recycled content, reformulating with ingredients that have less embodied carbon, or innovating new ways of making the product that are less energy intensive.