Schluter^®-LIPROTEC-CW

Cable for LIPROTEC White LED System

The LIPROTEC-CW cable features a pre-installed waterproof snap-in gland for a secure connection to the top of the niche, and connectors to attach the LED strip.

Rated for in-wall installation – no conduit required
Class 2 low voltage cable (CL2)
CSA FT4 rated (80°C)
2 conductor, 20AWG
UL listed in USA and Canada
For help in selecting the right cable length for your project, refer to the planning guide in the Downloads tab

...read more ...show less

Show Product Table

Schluter®-LIPROTEC-CW connection cables are rated for in-wall installation - no conduit required. The cable features a pre-installed waterproof snap-in gland for a secure connection to the top of the niche, and connectors to attach to the LED strip.

LIPROTEC-CW requires no special maintenance.

The LIPROTEC-CW cable connects the Schluter®-KERDI-BOARD-SNLT niche and the Schluter®-LIPROTEC-ECX or Schluter®-LIPROTEC-ECD driver. For instructions on making cable connections, please refer to the installation instructions for these products.

Need help determining the appropriate cable length for your installation? Check out the Planning Guide in the downloads tab.

Brochures and Pamphlets

Shower Brochure

2.48 MB

Pdf

KERDI-BOARD Brochure

1.5 MB

Pdf

LIPROTEC Brochure

2.23 MB

Pdf

Warranties

LIPROTEC-CW Cable Warranty

49.9 KB

Pdf

Product Table

22045-preview

8.63 KB

KERDI-BOARD-SNLT

206.14 KB

Pdf

Handbooks

Shower System Installation Handbook

1.76 MB

Pdf

LIPROTEC Planning Guide

2.99 MB

Pdf

Data sheets

KERDI-BOARD-SNLT Data Sheet

5.11 MB

Pdf

FAQ

Q:

What are the components I need to properly install my KERDI-BOARD-SNLT niche?

A:

KERDI-BOARD-SNLT Niche is sold as a 3-part system...

Q:

Do we need to use all three LIPROTEC components? Can I use another driver, LED, or wire?

A:

The LIPROTEC system is specifically designed to work together and is UL listed as a system. The cable and gland seal the wire outlet hole. The LED connectors are...

Q:

Are the components of the LIPROTEC system replaceable?

A:

Yes. The LED can easily be replaced by removing it from the mounting profile. NEC/CEC requires the drivers to be accessible, so they can also be...

Q:

Can the LIPROTEC-CW cable be extended if you do not have enough length to reach the LIPROTEC-ECD or LIPROTEC-ECX power supply?

A:

Yes, the cable can be extended. Our recommendation is to verify and consult with your local electrician, according to the electrical and building codes effective in your region, as to the...

Q:

Can I loosen or reposition the snap-in cable gland on the LIPROTEC-CW cable?

A:

No. Do not loosen or adjust the placement of the gland on the cable. Improper tightening of the gland could...