Schluter®-ECK-KHK

Retrofit, cove-shaped profile for inside wall corners

Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.
  • Ideal for commercial kitchens, bathrooms, food processing plants, or any environment where a sanitary corner is mandatory
  • Features a 5/16" (8 mm)-wide radius to prevent the accumulation of dirt and make cleaning simple
  • Subsequently bonded to the inside corners of existing tile or other wall coverings
  • 2-way and 3-way 90° inside corners are available, as well as 90° outside corners
  • Available in stainless steel and brushed stainless steel
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-ECK-KHK is a stainless steel profile that is subsequently bonded to the inside corners of existing tile or other wall coverings to produce a clean, decorative finish. As such, the profiles can be installed as a repair so that existing damaged corners do not have to be replaced. ECK-KHK provides a 5/16” (8 mm) radius to prevent the accumulation of dirt and make cleaning simple. Thus, the profile is especially suited for commercial kitchens, bathrooms, food processing plants or any environment where a sanitary corner is desired. Note: Matching inside and outside corners and connectors are available for ECK-KHK.

The Schluter®-ECK-KHK profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

1. ECK-KHK is applied to prepared wall corners using KERDI-FIX, silicone, or a similar adhesive. Prior to applying the adhesive, make sure that all surfaces are free from adhesion-inhibiting substances such as oil or grease. Apply a bead of adhesive to the back of each of the profile legs; then press the legs onto the wall covering, ensuring that the lateral edges lie flat and have solid contact throughout.

2. Use a suitable cleaning agent to remove any excess adhesive from around the profile legs.

3. Remove the protective foil.

Note: The ECK-KHK connectors should overlap the profiles by at least 3/8” (10 mm).

Install ECK-KHK inside and outside corners using a permanently elastic, waterproof adhesive (e.g., KERDI-FIX or silicone). Prior to application, any contact-inhibiting substances (e.g., grease, etc.) must be removed.

Product Table

10868-preview
22.4 KB
Profiles_Walls
2.25 MB
Pdf

Data sheets

Wall and Countertop Profiles Data Sheet
4.45 MB
Pdf

Brochures and Pamphlets

Commercial Product Overview
3.38 MB
Pdf

Warranties

WallandCountertop-Profiles-Warranty
57.76 KB
Pdf
Q:

How do I cut profiles?

A:

Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...

Read more

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo

Watch & Learn
About the product

Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
Best practices for cutting Schluter®-Systems Profiles

Best practices for cutting Schluter®-Systems Profiles

03:46
Maintenance for Schluter® Shower Drains & Schluter® Profiles

Maintenance for Schluter® Shower Drains & Schluter® Profiles

02:21

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Walls / Heavy-duty Corners

Schluter®-ECK-KI

Cove-shaped Profiles

Schluter®-DILEX-EHK

For Walls / Heavy-duty Corners

Schluter®-ECK-K

For Walls / Edging & Outside Wall Corners

Schluter®-RONDEC

For Walls / Heavy-duty Corners

Schluter®-ECK-E

Cove-shaped Profiles

Schluter®-DILEX-HKU