New Dallas-Fort Worth Facility
Schluter Systems Opens Additional Distribution, Office, and Training Center in Dallas-Fort Worth New Building is over 500,000 sq. ft.
Search Results for
Schluter ALL-SET®
Schluter ALL-SET®
Schluter ALL-SET® is a specialized modified thin-set mortar specifically formulated for use with Schluter® membranes and boards.
PRIMER-U
PRIMER-U
Schluter®-PRIMER-U is a ready-to-use universal primer used to enhance adhesion of mortars for hard-to-bond substrates such as gypsum underlayment, existing tile, terrazzo, steel (e.g. raised access panels), flooring adhesive residue, concrete with curing compounds, latex paint, and glass tile.
Drains / Shower Drains
KERDI-LINE
KERDI-LINE
Drains / Shower Drains
KERDI-LINE
Schluter®-KERDI-LINE is a low profile linear shower drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage.
Uncoupling (DITRA)
DITRA & DITRA-XL
DITRA & DITRA-XL
Uncoupling (DITRA)
DITRA & DITRA-XL
Schluter®-DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA and DITRA-XL perform all these functions while still providing adequate support/load distribution for the tile covering.
Uncoupling (DITRA)
DITRA-HEAT-DUO
DITRA-HEAT-DUO
Uncoupling (DITRA)
DITRA-HEAT-DUO
Schluter®-DITRA-HEAT-DUO is an uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with floor heating cables to create a warm, luxurious tile floor.
Q:
Do the new Schluter-KERDI-SHOWER–T/-TS/-TT shower trays with integrated KERDI membrane require additional waterproofing after installation?
A:
Yes, all wall to tray connections must be waterproofed with KERDI-BAND. All KERDI drains need to be sealed...
Read more
Q:
I need to remove and reinstall a tile on Schluter-DITRA. How can I do this safely?
A:
If you are in the process of setting the tile and the thin-set mortar is still fresh, simply run your margin trowel under the surface...
Read more
Q:
Can I use a premixed thin-set mortar to install Schluter®-KERDI and tile in my shower?
A:
No. Schluter®-Systems does not recommend the use of premixed thin-set mortars (mastics/adhesives) in any KERDI installation.
Read more
