Schluter®-KERDI-LINE in Matte Black
Schluter®-Systems is expanding its family of matte black products by introducing two new grates that are available for its KERDI-LINE linear drain.
Search Results for
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-AS
Schluter®-DILEX-AS
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-AS
Schluter®-DILEX-AS is a perimeter joint profile with a rigid PVC anchoring leg and a flexible joining leg with self-adhesive tape to bond the profile to fixed building elements, such as bathtubs, shower trays, and window frames.
Waterproofing
Schluter®-KERDI-SEAL-PS/-MV
Schluter®-KERDI-SEAL-PS/-MV
Waterproofing
Schluter®-KERDI-SEAL-PS/-MV
Schluter®-KERDI-SEAL-PS and Schluter®-KERDI-SEAL-MV are prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA & DITRA-XL
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA and DITRA-XL perform all these functions while still providing adequate support/load distribution for the tile covering.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SN
Schluter®-KERDI-BOARD-SN
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SN
Schluter®-KERDI-BOARD-SN is a prefabricated shower niche that is fully sealed, quick to install, and integrates with KERDI and KERDI-BOARD shower assemblies. All niche sizes include a waterproof KERDI-BAND frame to seal the seams, as well as screws and washers for fastening KERDI-BOARD-SN to stud framing.
For Stairs / Slip-resistant Treads
Schluter®-TREP-E/-EK
Schluter®-TREP-E/-EK
For Stairs / Slip-resistant Treads
Schluter®-TREP-E/-EK
Schluter®-TREP-E and TREP-EK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD
Schluter®-KERDI-BOARD
KERDI-BOARD Panels
Schluter®-KERDI-BOARD
Schluter®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used in bonded waterproofing assemblies with tile. KERDI-BOARD allows you to quickly and easily build tile-ready elements in showers, bathtub surrounds and platforms, countertops, vanities, shelving, and more!
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
For Countertops
Schluter®-RONDEC-CT
Schluter®-RONDEC-CT
For Countertops
Schluter®-RONDEC-CT
Schluter®-RONDEC-CT is a sink rail profile for countertops that have been fitted with a ceramic or stone tile covering. The face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded, thus eliminating the need for ceramic trim.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MOP
Schluter®-DILEX-MOP
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MOP
Schluter®-DILEX-MOP is a screed joint profile with rigid PVC side sections that protect tile edges and a soft PVC movement zone that separates individual fields in the tile assembly and forms the visible surface.
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.
Kerdi-Line Matte Black
KERDI-LINE Grates Now in Matte Black
Schluter Profiles in Classic Colors
The classic looks of both black and white never seem to go out of style. To support these common design choices, Schluter®-Systems now provides black and white finish options for their most popular profiles.
Matching Finishes on Drains, Shelves, Profiles
Schluter-Systems’ popular TRENDLINE textured finishes will now be applied to the KERDI-DRAIN-STYLE series of shower drain grates and the recently launched Schluter®-SHELF shower shelves.
Q:
Can Schluter® mortars be used with resin-backed tiles?
A:
Resin-backed tiles may require special setting materials. Consult the tile/stone supplier and Schluter...
Read more
Q:
Does Schluter®-KERDI waterproofing membrane have a front/back to it?
A:
No, the KERDI membrane does not have a front/back to it. One side of the membrane features printed gridlines...
Read more
Q:
When I switch to either "Control Mode" or "Max. Floor Temperature" on the thermostat, I do not see this change reflected in the Schluter Smart Thermostat app.
A:
These changes require a reinitialization of the app. Going back to the thermostat main page or..
Read more
