Shipping Policy
This page reflects our shipping & handling policy, effective as of April 1, 2023. Read more to see the entire policy.
Search Results for
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e. no floating floors).
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®-DILEX-BWA
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®- DILEX-BWA is a perimeter joint profile with a rigid PVC anchoring leg and a 3/16” (5 mm)-wide, soft CPE movement zone that isolates the tile covering from fixed building elements, such as bathtubs, shower trays, and door and window frames.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-DFP
Schluter®-DILEX-DFP
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-DFP
Schluter®-DILEX-DFP is a movement joint profile for installation at door areas or for dividing screed surfaces.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW is a PVC cove-shaped profile for inside wall corners and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK is a PVC, cove-shaped profile with a single anchoring leg for inside wall corners, countertop/backsplash transitions and floor/wall transitions where limited movement is expected.
Accessories / Profiles
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Accessories / Profiles
Schluter®-SHOWERPROFILE-WS/-WSK
The Schluter®-SHOWERPROFILE-WS and SHOWERPROFILE-WSK are two-part profiles that form a splashguard at the entrance of curbless showers.
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
Schluter®-SHOWERPROFILE-R
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
The Schluter®-SHOWERPROFILE-R is a two-part wall transition profile for covering the exposed wall area where the floor slopes down to a perimeter linear drain.
Eco-Conscious Construction at Schluter-Systems Canada HQ
Built to meet the growing needs of our Canadian headquarters, this 66,000 ft2 facility includes three floors of offices, a large training center, a multimedia studio and a sample preparation department. Our building showcases the compatibility of ceramic tile with green building practices.
Terms and Conditions
By accessing the Website, you agree to be bound by and comply with these Terms of Use, which is a legally binding agreement between you and Schluter.
Q:
Once my tile is installed, it will be higher than the adjacent carpet. What profile would you recommend for this uneven transition?
A:
The Schluter®-RENO-TK profile provides a sloped transition between the tile and carpet and features a channel below...
Read more
Q:
Do I need to provide movement joints when I use Schluter-DITRA in my tile installation?
A:
Yes. DITRA does not eliminate the need for movement joints. Movement joints are essential in any tile installation to prevent...
Read more
Q:
How do I cut profiles?
A:
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...
Read more
