The Schluter®-SHELF
Five Designs. Five Configurations. Six TRENDLINE Finishes. Plus, Brushed Stainless Steel.
Search Results for
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK-F/-KERS-B
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK and KERDI-KERS-B are preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD are anchors used to provide additional mechanical attachment of KERDI-BOARD when the bond between the thin-set mortar and the substrate is questionable.
Profiles
Schluter®-KERDI-BOARD-ZW
Schluter®-KERDI-BOARD-ZW
Profiles
Schluter®-KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
Accessories / Shelves
Schluter®-SHELF-N
Schluter®-SHELF-N
Accessories / Shelves
Schluter®-SHELF-N
The Schluter®-SHELF-N is a rectangular shelf designed to fit into Schluter®-KERDI-BOARD-SN/-SNLT prefabricated niches.
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC is a cover plate for use with the KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK is a double-sided adhesive tape used to attach KERDI-BOARD panels in joint areas or similar.
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP is a flat plastic profile, which is adhered behind the KERDI-BOARD-ZA profile to improve fastening of hardware with screws.
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA is an adhesive tape for reinforcing the joint areas of KERDI-BOARD panels where waterproofing is not required.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZS/-ZT
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to metal or wood stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.
KERDI-BOARD-ZS are coarse thread screws used to fasten KERDI-BOARD to wood stud framing with the corresponding washers.
Innovation Workshop: Part 2
If you've completed Part 1, take the next step and join us for Innovation Workshop Part 2. Expand your knowledge of Schluter's solutions to include linear drain installations, heated floors, custom design elements and more!
Q:
Can I install the DESIGN-NICHE adjustable frame directly on the KERDI-BOARD/wall surface?
A:
Yes, if build-up from the thickness of the frame's flange is not a concern (such as with large format tile installation), you can cut a...
Read more
Q:
I installed my Schluter®-KERDI membrane yesterday. Why is it so easy to peel it off the wall today?
A:
Thin-set mortar takes time to cure. The bond strength will increase over the first week and month after installation...
Read more
Q:
What are your shipping rates?
