Schluter®-TREP-SE-S-B
Perfil de peldaño con superficie antideslizante de caucho termoplástico
- Evita el astillamiento de los bordes de las baldosas
- Asegura una superficie antideslizante
- Presenta un ala de fijación de acero inoxidable (-SE) o aluminio (-S y -B) perforada en forma trapezoidal con una superficie de desgaste de caucho termoplástico antideslizante.
- Ideal para oficinas, espacios comerciales y otras áreas públicas
- Diseñado con una banda pisable de color, que puede sustituirse en caso de daño o desgaste (varios colores disponibles)
- Diseñado para áreas expuestas un tráfico peatonal intenso.
- Hay disponibles tapones terminales
- Disponible en acero inoxidable cepillado (-SE) o aluminio (-S o -B)
Encuentre aquí los accesorios recomendados
Estimador de perfiles
Descubra lo que necesita para proteger las baldosas y facilitar las transiciones.
Schluter®-TREP-SE, Schluter®-TREP-S and Schluter®-TREP-B are designed to protect tiled stair edges and provide an easily visible, slipresistant wear surface for durable, safe, and visually appealing stair-nosing design. They are suitable for use in areas subjected to heavy foot-traffic, such as offices or public buildings.
The profiles feature a trapezoid-perforated anchoring leg made of stainless steel (TREP-SE) or aluminum (TREP-S and TREP-B), which is secured in the mortar bond coat beneath the tile and supports a slip-resistant thermoplastic rubber wear surface. The tread surface of TREP-SE/-S/-B is available in a variety of colors and can be replaced in case of damage or wear.
TREP-B features a 2-1/8" (52 mm)-wide wear surface, allowing the designer to easily produce stairs with the first and last steps marked by a 2" (50 mm)- wide strip in a contrasting color to increase visibility and safety.
The leading edges of TREP-S, TREP-SE and TREP-B have a 5/16" (8 mm) radius. Matching end caps are available.
The Schluter®-TREP-SE and Schluter® TREP-S and Schluter® TREP-B stair nosing profiles require no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. The treads of TREP-SE, TREP-S. and TREP-B can be replaced in case of damage or wear.
The treads of TREP-SE, TREP-S, and TREP-B can be replaced in case of damage or wear.
1. Select profile according to the tile thickness and format.
2. Install riser tile flush with the stair tread surface.
3. Using a notched trowel, apply thin-set mortar along edge area above riser.
4. Fill the cavity on the underside of the profile with thin-set mortar.
5. Press the trapezoid-perforated anchoring leg of the profile into the thin-set mortar, making sure the front edge of the support section is aligned flush with the riser tile. Full coverage must be obtained at the edge area to ensure support of the tile.
6. Trowel additional thin-set mortar over the perforated anchoring leg and the stair tread surface to ensure full coverage and support of the tile edges.
7. Solidly embed the tiles so that the tiled surface is flush with the top of the profile.
8. A joint of approx. 1/16" - 1/8" (1.5 - 3 mm) should be left between the tile and the profile.
9. Fill the joint completely with grout or setting material.
FAQ
How do I cut profiles?
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...
Leer másDibujos CAD
Specify our products using the
Ver y aprender
Acerca del producto
Como instalar remates en cantos de escaleras cerámicas: Perfiles Schluter®-TREP-SE/-S/-B/-TAP
Introducción los perfiles Schluter®
Consejos para elegir la altura de su perfil en relación con su baldosa
Encuentre tutoriales y videos de documentación de proyectos para aprender cómo sacar mejor provecho de nuestros productos, ¡empiece ahora y diviértase!
Ver más vídeos / listas de reproducción
