Schluter®-RENO-T

Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).

  • Prevents tile edges from chipping
  • Ideal for floor installations where tile is bordered by wood, laminate, or other hard floor coverings
  • Designed for floor transitions in retrofit applications
  • In certain materials and sizes, the profile is flexible and can be used to form curves
  • Available in stainless steel, solid brass, and anodized aluminum
Read more

Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).

  • Prevents tile edges from chipping
  • Ideal for floor installations where tile is bordered by wood, laminate, or other hard floor coverings
  • Designed for floor transitions in retrofit applications
  • In certain materials and sizes, the profile is flexible and can be used to form curves
  • Available in stainless steel, solid brass, and anodized aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-RENO-T

Schluter®-RENO-T

Edge-protection profile for retrofit applications
Schluter®-RENO-T
Schluter®-RENO-T
Schluter®-RENO-T
Schluter®-RENO-T
Schluter®-RENO-T

Product type

Next

Schluter®-RENO-T is designed to provide transitions between existing same-height, hard-surface floor coverings (e.g., ceramic tile or natural stone, parquet flooring, concrete pavers, laminate, etc.), primarily in retrofit applications.

The profile is available in stainless steel, solid brass, and anodized aluminum. RENO-T is installed within the existing joint cavity and overlaps adjoining surface materials, thus preventing edges from becoming damaged when subjected to mechanical stress.

RENO-T, in brass and anodized aluminum size 9/14, is flexible in the lateral direction and can be used in curved applications.

1. Select the profile according to joint width, to ensure proper support of the lateral crosspiece.

2. The joint cavity must be at least 3/8" (9 mm) deep and free of debris. Substances that inhibit adhesion must be removed from the sides of the joint.

3. Fill the joint with elastomeric sealant such as Schluter®-KERDI-FIX or similar. Then insert the vertical leg of RENO-T in the joint so that the lateral crosspiece rests completely on the edges of the surface coverings.

4. Remove any excess sealant with a suitable cleaner.

The Schluter®-RENO-T profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Oxidation films on exposed solid brass or aluminum may be removed with a common polishing agent but will form again.  In the case of anodized aluminum, do not use abrasive cleaning agents.

Downloads

Data sheets

Warranties

FAQ

Architectural Material

Specify our products using the Specification Logo

Watch & Learn about this product

/

Schluter®-SCHIENE

Same-height Transitions

Schluter®-SCHIENE

Finishing and edge-protection profile with minimum reveal

Schluter®-DECO

Same-height Transitions

Schluter®-DECO

Decorative, edge-protection profile

Schluter®-DITRA & DITRA-XL

Uncoupling (DITRA)

Schluter®-DITRA & DITRA-XL

Uncoupling and waterproofing membrane

Schluter®-PROCUT-TSM

Tools

Schluter®-PROCUT-TSM

Cutting wheel for metal profiles