Heated tile floors are the ultimate in beauty, durability and luxury. However the frequent fluctuations in temperature leads to increased expansion and contraction, creating greater movement stresses in the tile covering and increasing the need for uncoupling.
The DITRA-HEAT-DUO membrane with its integrated thermal break provides an uncoupling layer below the tile which neutralizes movement stresses and prevents cracked tiles and grout. By preventing the loss of heat to the subfloor, DITRA-HEAT-DUO provides considerable energy savings and complete comfort even with tiled floors that are traditionally cold when installed over concrete.
The DITRA-HEAT-HK heating cables can be snapped into place, with no clips or fasteners required. The entire tile floor can be heated, or cables can be placed to create customized heating zones. Cables are held securely within the DITRA-HEAT-DUO mat, so no self-leveling compounds are needed to encapsulate the heating cables. Control your floor heating system with the DITRA-HEAT-E-RT programmable touchscreen thermostat.
This template also features the SCHIENE L-angle profile for use at transitions to adjacent coverings of the same height to finish exposed tile edges, and prevent them from chipping. For large surface areas, movement joints should also be incorporated. The DILEX-BWS movement joint profile features a 3/16" (5 mm) -wide soft movement zone that absorbs movement, while providing a discreet visible surface that blends in to the grout pattern.
All the products on this template can be configured in terms of size, finish, and quantity to suit your application. Take a look at the product list and get started!
Uncoupling membrane with integrated sound control and thermal break
Electric radiant floor heating cables used with DITRA-HEAT membrane
Programmable touchscreen thermostat for the DITRA-HEAT system
Finishing and edge-protection profile with minimum reveal