Brushed Stainless Steel Shower Shelves
A shelf is a near necessity in a shower. The most common solution in a tiled shower is for the installer to construct a shelf using a tile covering that matches or accents the tiles in the shower area.
Search Results for
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD are anchors used to provide additional mechanical attachment of KERDI-BOARD when the bond between the thin-set mortar and the substrate is questionable.
Profiles
Schluter®-KERDI-BOARD-ZW
Schluter®-KERDI-BOARD-ZW
Profiles
Schluter®-KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK is a double-sided adhesive tape used to attach KERDI-BOARD panels in joint areas or similar.
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP is a flat plastic profile, which is adhered behind the KERDI-BOARD-ZA profile to improve fastening of hardware with screws.
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA is an adhesive tape for reinforcing the joint areas of KERDI-BOARD panels where waterproofing is not required.
Profiles
Schluter®-KERDI-BOARD-ZB
Schluter®-KERDI-BOARD-ZB
Profiles
Schluter®-KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD
Schluter®-KERDI-BOARD
KERDI-BOARD Panels
Schluter®-KERDI-BOARD
Schluter®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used in bonded waterproofing assemblies with tile. KERDI-BOARD allows you to quickly and easily build tile-ready elements in showers, bathtub surrounds and platforms, countertops, vanities, shelving, and more!
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZS/-ZT
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to metal or wood stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.
KERDI-BOARD-ZS are coarse thread screws used to fasten KERDI-BOARD to wood stud framing with the corresponding washers.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-KIT
Schluter®-KERDI-BOARD-KIT
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-KIT
The Schluter®-KERDI-BOARD-KIT combines all of the necessary components to waterproof the walls of your bathtub and acrylic shower base using waterproof building panels.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-E
Schluter®-KERDI-BOARD-E
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-E
The Schluter®-KERDI-BOARD-E is an L-shaped panel used to create 90° corners, and pipe or column coverings to be tiled–without the need for wood or metal framing.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-U
Schluter®-KERDI-BOARD-U
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-U
The innovative, prefabricated Schluter®-KERDI-BOARD-U makes it especially easy to conceal pipes and columns.
More Shower Trays, Even More Possibilities
To help create unique spaces more easily, Schluter-Systems is now introducing 16 new prefabricated, sloped trays for showers with the KERDI-DRAIN point drain and KERDI-LINE linear drain.
DITRA 2.0: Now even better
DITRA provides the 4 essential functions that ensure the durability of tiled floors: uncoupling, waterproofing, load support, and vapor management. A convenient alternative to cement backer board or plywood and OSB, DITRA is thin, lightweight, and quick and easy to install.
New Horizontal Niches Featuring LIPROTEC LED Lighting
Schluter®-Systems, a leader in innovative tile installation solutions, is excited to announce the addition of new horizontal niches to its KERDI-BOARD-SNLT product line. These niches feature integrated LIPROTEC LED lighting technology, and now offer expanded design possibilities and a sleek, modern aesthetic for shower spaces.
Q:
Why isn't my LIPROTEC LED lighting up or is flickering?
A:
Incorrect or poor wiring connection. The polarity of low voltage V+ (RED) and V-(Black) are reversed OR the circuit breaker is off or tripped. Recheck all connections.
Read more
Q:
The LED is sticky from dirt or thin-set/grout dust and is difficult to insert to the profile.
A:
Clean the LED with soapy water. This same solution can be done using a spray bottle to help lubricate the interface between...
Read more
Q:
Are the components of the LIPROTEC system replaceable?
A:
Yes. The LED can easily be replaced by removing it from the mounting profile. NEC/CEC requires the drivers to be accessible, so they can also be...
Read more
