Vinpro Profiles for Resilient Flooring
Schluter is launching a line of profiles made specifically for resilient flooring applications.
Search Results for
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-AS
Schluter®-DILEX-AS
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-AS
Schluter®-DILEX-AS is a perimeter joint profile with a rigid PVC anchoring leg and a flexible joining leg with self-adhesive tape to bond the profile to fixed building elements, such as bathtubs, shower trays, and window frames.
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts.
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-KSA
Schluter®-DILEX-KSA
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-KSA
Schluter®-DILEX-KSA is a perimeter joint profile with a stainless steel or aluminum anchoring leg and a 3/8” (10 mm)-wide, replaceable rubber movement zone that isolates the tile covering from fixed building elements.
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Profiles
Schluter®-KERDI-BOARD-ZB
Schluter®-KERDI-BOARD-ZB
Profiles
Schluter®-KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
17 New Cable Length Options for DITRA-HEAT
There are now double the number of cable lengths available for the Schluter-Systems DITRA-HEAT floor warming system. The DITRA-HEAT system is unique because the heating cables are easily snapped into place on top of the uncoupling mat with no clips or fasteners.
Easier with the Horizontal Drain Outlet
Relocating a drain for a shower can be extremely challenging and potentially expensive in many remodeling and renovation situations.
Subpar Tile Installation
Fight Subpar Tile Installation Says John Trent -The Ceramic Tile Education Foundation
Q:
Can I use Schluter®-KERDI in my steam shower?
A:
Yes. KERDI is suitable for use in intermittent use steam showers. Schluter®-KERDI-DS is required for continuous use steam rooms...
Read more
Q:
How far up the wall do I need to install the Schluter®-KERDI?
A:
For showers and bathtub surrounds, KERDI must be carried to the height of the showerhead at minimum...
Read more
Q:
How do I cut profiles?
A:
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...
Read more
