Is KERDI-FIX a suitable adhesive to glue down the VINPRO profiles?
KERDI-FIX is our recommended adhesive for installing VINPRO profiles ...
Search Results for
Accessories / Profiles
Schluter®-SHOWERPROFILE-S
Schluter®-SHOWERPROFILE-S
Accessories / Profiles
Schluter®-SHOWERPROFILE-S
The Schluter®-SHOWERPROFILE-S is a two-part profile with a tapered edge, designed to cover adjoining tile edges that become exposed as the shower floor slopes to accommodate drainage to the KERDI-LINE linear drain.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-T/-TS/-TT
Schluter®-KERDI-SHOWER-T/-TS/-TT
Prefabricated Substrates
Schluter®-KERDI-SHOWER-T/-TS/-TT
Schluter®-KERDI-SHOWER-T/-TS/-TT are prefabricated sloped shower trays with integrated KERDI waterproofing that eliminate the need for a mortar bed.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWB
Schluter®-DILEX-BWB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWB
Schluter®-DILEX-BWB is a prefabricated surface joint profile with rigid PVC anchoring legs that protect tile edges. It features a 3/8” (10 mm)-wide, soft CPE movement zone that separates individual fields in the tile covering and forms the visible surface.
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK is a PVC, cove-shaped profile with a single anchoring leg for inside wall corners, countertop/backsplash transitions and floor/wall transitions where limited movement is expected.
Cables
Schluter®-DITRA-HEAT-E-HK
Schluter®-DITRA-HEAT-E-HK
Cables
Schluter®-DITRA-HEAT-E-HK
Schluter®-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications.
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC is a cover plate for use with the KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end.
Waterproofing
Schluter®-KERDI-SEAL-PS/-MV
Schluter®-KERDI-SEAL-PS/-MV
Waterproofing
Schluter®-KERDI-SEAL-PS/-MV
Schluter®-KERDI-SEAL-PS and Schluter®-KERDI-SEAL-MV are prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.
Profiles
Schluter®-KERDI-BOARD-ZB
Schluter®-KERDI-BOARD-ZB
Profiles
Schluter®-KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWS
Schluter®-DILEX-BWS
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWS
Schluter®-DILEX-BWS is a prefabricated surface joint profile with rigid PVC anchoring legs that protect tile edges. It features a 3/16” (5 mm)-wide, soft CPE movement zone that separates individual fields in the tile covering and forms the visible surface.
Vinpro Profiles for Resilient Flooring
Schluter is launching a line of profiles made specifically for resilient flooring applications.
Designbase-SL-Higher Wall Baseboards
Baseboards in commercial buildings must be durable and attractive, and often need to meet specific code and hygienic requirements. Schluter-Systems is expanding its line of Schluter®-DESIGNBASE-SL top-set wall baseboards that provide a modern alternative to traditional baseboards for commercial buildings and condominiums.
Trendline Totally on Trend Finishes
Match the latest tile trends with Schluter’s TRENDLINE linear drain grates in nine colors. Pair with KERDI-LINE, KERDI-DRAIN, and matching profiles for a seamless look. Explore now!
Q:
How do I cut profiles?
A:
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...
Read more
Q:
The tile I’ve chosen for my floor doesn’t have a matching cove base available. I’d rather not select another tile. Do you have any solutions?
A:
Yes. Schluter-Systems offers various profiles that allow the user to produce a finished tile base with a cove...
Read more
Q:
What is included in my DESIGN-NICHE kit?
A:
The DESIGN-NICHE kit includes: Prefabricated shower niche made of powder-coated aluminum, adjustable frame...
Read more
