PRIMER-U Universal Primer for bonding
Schluter is now launching a brand new ready-to-use universal primer to enhance adhesion of mortars to hard-to-bond surfaces.
Search Results for
R
Radius available for products with this label
Balcony Profiles
Schluter®-BARA-RWL
R
Schluter®-BARA-RWL
View Product Details
Schluter®-BARA-RWL
Balcony Profiles
Schluter®-BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
For Floors / Sloped Transitions
Schluter®-RENO-TK
R
Schluter®-RENO-TK
View Product Details
Schluter®-RENO-TK
For Floors / Sloped Transitions
Schluter®-RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
For Floors / Sloped Transitions
Schluter®-RENO-U
Schluter®-RENO-U
For Floors / Sloped Transitions
Schluter®-RENO-U
Schluter®-RENO-U is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations by abutting both surfaces.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP is a finishing and edging profile for resilient floor covering (e.g., LVT) installations on stairs. The top of the profile features a square design and a capping flange that is ribbed to provide slip protection.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
Videos
Have a look through our product-based playlists to find exactly what you are looking for and learn all you need to learn… or get side-tracked by the abundance of amazing video content we have to offer!
Tile Installation on Problematic Substrates
Presented at Qualicer, Castellon, Spain, William M. Carty, Ph.D. and Peter A. Nielsen,
Floor Warming for Shower Floors
By using a dedicated heating cable and ensuring the shower area has completed required waterproofing steps the shower floor can be warmed, just like any other tiled floor.
Q:
How far from the wall is the KERDI-LINE linear drain installed?
A:
It is installed directly against the wall, so that the channel body support is in contact with the wall. The drain...
Read more
Q:
How can I install the SHELF-E when the inside wall corner is not square?
Q:
Can Schluter®-DITRA-HEAT-E-HK heating cables be installed on walls?
