Fine Profile Specifically for Glass Mosaics
Schluter®-FINEC is a finishing and edge protection profile for the external edges of delicate tile coverings and glass mosaics.
Search Results for
Profiles
Schluter®-KERDI-BOARD-ZA
Schluter®-KERDI-BOARD-ZA
Profiles
Schluter®-KERDI-BOARD-ZA
The Schluter®-KERDI-BOARD-ZA is a U-shaped brushed stainless steel profile with two perforated sides designed to finish edges of partition walls, shelves, and similar structures made with KERDI-BOARD.
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-TAP
Schluter®-TREP-TAP
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-TAP
The Schluter®-TREP-TAP is an anodized aluminum cover profile that integrates with the TREP-S and TREP-B stair-nosing profiles to conceal the top of the riser.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-KSA
Schluter®-DILEX-KSA
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-KSA
Schluter®-DILEX-KSA is a perimeter joint profile with a stainless steel or aluminum anchoring leg and a 3/8” (10 mm)-wide, replaceable rubber movement zone that isolates the tile covering from fixed building elements.
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
For Stairs / Slip-resistant Treads
Schluter®-TREP-V
Schluter®-TREP-V
For Stairs / Slip-resistant Treads
Schluter®-TREP-V
Schluter®-TREP-V is an anodized aluminum profile with a PVC tread designed to protect tiled stair edges. The specially textured slip-resistant tread makes TREP-V well suited for use in areas with heavy foot traffic, such as offices or public buildings. The replaceable PVC tread is available in a variety of colors including high visibility options.
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
For Walls / Decorative
Schluter®-DESIGNLINE
Schluter®-DESIGNLINE
For Walls / Decorative
Schluter®-DESIGNLINE
Schluter®-DESIGNLINE is a border profile used to create decorative designs in tile fields on walls. In stainless steel, the profile can also be used to produce decorative designs in floors.
For Stairs / Slip-resistant Treads
Schluter®-TREP-SE-S-B
Schluter®-TREP-SE-S-B
For Stairs / Slip-resistant Treads
Schluter®-TREP-SE-S-B
Schluter®-TREP-SE, TREP-S and TREP-B are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
10' Profiles
Elevated ceiling heights and high tiled walls and showers are quickly becoming the norm in new construction. Reach these new heights and match the latest tile trends with our 10-foot profiles.
Matching Finishes on Drains, Shelves, Profiles
Schluter-Systems’ popular TRENDLINE textured finishes will now be applied to the KERDI-DRAIN-STYLE series of shower drain grates and the recently launched Schluter®-SHELF shower shelves.
Vinpro Profiles for Resilient Flooring
Schluter is launching a line of profiles made specifically for resilient flooring applications.
Q:
Once my tile is installed, it will be higher than the adjacent carpet. What profile would you recommend for this uneven transition?
A:
The Schluter®-RENO-TK profile provides a sloped transition between the tile and carpet and features a channel below...
Read more
Q:
Do I need to provide movement joints when I use Schluter-DITRA in my tile installation?
A:
Yes. DITRA does not eliminate the need for movement joints. Movement joints are essential in any tile installation to prevent...
Read more
Q:
How do I cut profiles?
A:
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...
Read more
