¿KERDI-FIX es un adhesivo adecuado para pegar los perfiles VINPRO?
KERDI-FIX es nuestro adhesivo recomendado para la instalación de perfiles VINPRO ...
Resultados de búsqueda para
Waterproofing
Schluter®-KERDI-FIX
Schluter®-KERDI-FIX
Waterproofing
Schluter®-KERDI-FIX
Schluter®-KERDI-FIX is a single-component sealing and bonding compound with a silane-modified polymer base. It is odor-neutral, UV- and weather-resistant, and contains no solvents. KERDI-FIX is elastomeric and bonds well to most materials, such as wood, stone, concrete, metal, glass, and many plastics.
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®-DILEX-BWA
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®- DILEX-BWA is a perimeter joint profile with a rigid PVC anchoring leg and a 3/16” (5 mm)-wide, soft CPE movement zone that isolates the tile covering from fixed building elements, such as bathtubs, shower trays, and door and window frames.
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD are anchors used to provide additional mechanical attachment of KERDI-BOARD when the bond between the thin-set mortar and the substrate is questionable.
Profiles
Schluter®-KERDI-BOARD-ZW
Schluter®-KERDI-BOARD-ZW
Profiles
Schluter®-KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
Accessories / Shelves
Schluter®-SHELF-N
Schluter®-SHELF-N
Accessories / Shelves
Schluter®-SHELF-N
The Schluter®-SHELF-N is a rectangular shelf designed to fit into Schluter®-KERDI-BOARD-SN/-SNLT prefabricated niches.
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC is a cover plate for use with the KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK is a double-sided adhesive tape used to attach KERDI-BOARD panels in joint areas or similar.
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP is a flat plastic profile, which is adhered behind the KERDI-BOARD-ZA profile to improve fastening of hardware with screws.
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA is an adhesive tape for reinforcing the joint areas of KERDI-BOARD panels where waterproofing is not required.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
Q:
¿Cuáles son las restricciones sobre dónde puedo instalar los cables calefactores Schluter®-DITRA-HEAT?
A:
Los cables calefactores DITRA-HEAT no pueden instalarse bajo lavabos sin espacio de aire debajo, plataformas de bañera...
Leer más
Q:
¿Qué tipo de mortero de capa fina debo utilizar para instalar Schluter®-KERDI?
A:
El tipo de mortero adhesivo utilizado para aplicar KERDI debe ser adecuado para el substrato y debe penetrar e insertarse en el geotextil de la membrana…
Leer más
Q:
¿Qué tamaño de llana dentada debo utilizar para instalar Schluter®-KERDI?
A:
Se recomienda utilizar una llana dentada en V de 1/4" x 3/16" (6 mm x 5 mm) o la llana Schluter-KERDI-TROWEL....
Leer más
